Configuring Ip Unnumbered - H3C S9500 Series Operation Manual

Operation Manual – IP Addressing
H3C S9500 Series Routing Switches
PING 172.16.1.2: 56
Reply from 172.16.1.2: bytes=56 Sequence=1 ttl=255 time=25 ms
Reply from 172.16.1.2: bytes=56 Sequence=2 ttl=255 time=27 ms
Reply from 172.16.1.2: bytes=56 Sequence=3 ttl=255 time=26 ms
Reply from 172.16.1.2: bytes=56 Sequence=4 ttl=255 time=26 ms
Reply from 172.16.1.2: bytes=56 Sequence=5 ttl=255 time=26 ms
--- 172.16.1.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 25/26/27 ms
The above information shows that Switch can communicate with the hosts on the
subnet 172.16.1.0/24.
# Use the ping command to verify the connectivity between Switch and the hosts on
the subnet 172.16.2.0/24.
<Sysname> ping 172.16.2.2
PING 172.16.2.2: 56
Reply from 172.16.2.2: bytes=56 Sequence=1 ttl=255 time=25 ms
Reply from 172.16.2.2: bytes=56 Sequence=2 ttl=255 time=26 ms
Reply from 172.16.2.2: bytes=56 Sequence=3 ttl=255 time=26 ms
Reply from 172.16.2.2: bytes=56 Sequence=4 ttl=255 time=26 ms
Reply from 172.16.2.2: bytes=56 Sequence=5 ttl=255 time=26 ms
--- 172.16.2.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 25/25/26 ms
The above information shows that Switch can communicate with the hosts on the
subnet 172.16.2.0/24.
# Use the ping command to verify the connectivity between hosts on the subnet
172.16.1.0/24 and hosts on subnet 172.16.2.0/24. Ping Host B from Host A to verify
that the ping operation is successful.

1.3 Configuring IP Unnumbered

This section includes:
Configuration Prerequisites
Configuration Procedure
IP Unnumbered Configuration Example
data bytes, press CTRL_C to break
data bytes, press CTRL_C to break
1-6
Chapter 1 IP Addressing Configuration