Displaying And Maintaining Proxy Arp; Proxy Arp Configuration Example - H3C S9500 Series Operation Manual

Operation Manual – ARP
H3C S9500 Series Routing Switches

2.3 Displaying and Maintaining Proxy ARP

Display whether proxy
ARP is enabled
Display whether local
proxy ARP is enabled

2.4 Proxy ARP Configuration Example

I. Network requirements
Host A and Host D have IP addresses of the same network segment. Host A belongs to
VLAN 1, and Host D belongs to VLAN 2. Configure proxy ARP on the device to enable
the communication between the two hosts.
II. Network diagram
Figure 2-1 Network diagram for proxy ARP
III. Configuration procedure
# Configure Proxy ARP on the device to enable the communication between Host A
and Host D.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] vlan 1
To do...
display proxy-arp [ interface
interface-type interface-number ]
display local-proxy-arp
[ interface interface-type
interface-number ]
Chapter 2 Proxy ARP Configuration
Use the command...
2-2
Remarks
Available in any
view
Available in any
view