Initial Utility Installation - Planet ICA-108 User Manual

2.4 Initial Utility Installation

This chapter shows how to quick set up your IR IP Camera. The IR IP Camera is with the default
settings. However to help you find the IR IP Camera quickly the windows utility-IP Wizard can
search the IR IP Cameras in the network that shall help you to configure some basic setting before
you started advanced management and monitoring.
1. Insert the bundled CD into the CD-ROM drive to launch the autorun program. Once completed,
a welcome menu screen will appear. Please click the IP camera model name to next page.
2. Click the "IP Wizard" hyperlink; you will see the InstallShield Wizard dialog box as below.
NOTE: If the welcome screen does not appear, click "Start" at the taskbar. Then, select
"Run" and type "D:\Utility\IPWizard\setup.exe", assume D is your CD-ROM drive.
3. The "Welcome to the InstallShield Wizard for IP Wizard" will display on the screen and click
"Next" to continue.
9