E-Mail - Planet ICA-108 User Manual

3.11 E-Mail

You may setup SMTP mail parameters for further operation of Event Schedule. That's, if users
want to send the alarm message out, it will need to configure parameters here and also add at
least one event schedule to enable event triggering.
SMTP Server:
Test:
SMTP Port:
SMTP Authentication:
Disable:
Enable:
Authentication User Name:
Authentication Password:
E-mail To:
E-mail From:
E-mail Subject:
Type the SMTP server name or the IP address of the SMTP
server.
Send a test mail to mail server to check this account is
available or not.
Set port number of SMTP service.
Select the authentication required when you send an e-mail.
If no authentication is required when an e-mail is sent.
If authentication is required when an e-mail is sent.
Type the user name for the SMTP server if Authentication is
Enable.
Type the password for the SMTP server if Authentication is
Enable.
Type the receiver's e-mail address.
Type the sender's E-mail address. This address is used for
reply e-mails.
Type the subject/title of the e-mail.
58