Subscribe to Our Youtube Channel
Related Manuals for Planet ICA-550W
Summary of Contents for Planet ICA-550W
-
Page 1: Internet Camera
Internet Camera ICA-150 / ICA-150W / ICA-550W User’s Manual Version: 1.0 (June, 2006) - Page 2 Copyright Copyright© 2006 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of PLANET.
- Page 3 Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately. Revision User’s Manual for PLANET Internet Camera Model: ICA-150 / ICA-150W / ICA-550W Rev: 1.0 (June, 2006) Part No. EM-ICA550W...
-
Page 5: Table Of Contents
Table of Contents CHAPTER 1 INTRODUCTION ................1 Overview ..........................1 Physical Details - Internet Camera .................. 4 Package Contents ......................5 CHAPTER 2 BASIC SETUP ..................6 System Requirements......................6 Installation - Internet Camera..................7 Setup using the Windows Wizard ..................9 CHAPTER 3 VIEWING LIVE VIDEO.............. - Page 6 Main Screen ........................66 Recording Video ......................68 CHAPTER 7 TROUBLESHOOTING..............72 Overview .......................... 72 Problems........................... 72 APPENDIX A SPECIFICATIONS..................74 Internet Camera ......................74 Regulatory Approvals ..................... 74 Copyright Notice......................75 APPENDIX B STREAMING VIDEO/AUDIO SOLUTION..........89 Overview .......................... 89...
-
Page 7: Introduction
Figure 1: Internet Camera ICA-550W is a P/T Wireless Camera, ICA-150 is PoE IP Camera and ICA-150W is the fixed Lens Wireless Camera. In the following section, unless specified, The term “Internet Camera” will means any of ICA-550W, ICA-150 or ICA-150W. -
Page 8: Internet Features
Features • Standalone Design. The Internet Camera is a standalone system with built-in CPU and Video encoder. It requires only a power source and a connection to your LAN or Wireless LAN. • Stream Live Video to Multiple Users. The MPEG4 encoder and HTTP server built into the camera generate a ready-to-view video stream. - Page 9 Wireless Features – ICA-550W/ ICA-150W • Standards Compliant. The ICA-550W/150W complies with the IEEE802.11g (DSSS) specifications for Wireless LANs. • Supports both 802.11b and 802.11g Standards. ICA-550W/150W supports both 802.11b and 802.11g standards. • Speeds to 54Mbps. All speeds up to the 802.11g maximum of 54Mbps are supported.
-
Page 10: Physical Details - Internet Camera
Physical Details - Internet Camera Front - Internet Camera No physical adjustment is required or possible for the lens, but you Lens should ensure that the lens cover remain clean. The image quality is degraded if the lens cover is dirty or smudged. The built-in microphone is mounted on the front and center. -
Page 11: Package Contents
The following items should be included: If any of these items are damaged or missing, please contact your dealer immediately. 1. Internet Camera 2. Camera Mount 3. Antenna (ICA-550W / ICA-150W) 4. Power adapter 5. Installation CD-ROM 6. Quick Installation Guide... -
Page 12: Basic Setup
Chapter 2 Basic Setup This Chapter provides details of installing and configuring the Internet Camera. System Requirements • To use the wired LAN interface, a standard 10/100Base-TX hub or switch and network cable is required. • To use the Wireless interface on the Internet Camera, other Wireless devices must be compliant with the IEEE802.11b or IEEE802.11g specifications. -
Page 13: Installation - Internet Camera
Installation - Internet Camera Figure 2: Camera Assembly 1. Assemble the Camera Screw the supplied antenna to the mounting point on the rear. 2. Connect the LAN Cable Connect the Internet Camera to a 10/100Base-TX hub or switch, using a standard LAN cable. - Page 14 4. Check the LEDs • The Power LED will turn on briefly, then start blinking. It will blink during startup, which takes 15 to 20 seconds. After startup is completed, the Power LED should remain ON. • The Network LED should be ON. For more information, refer to Physical Details - Internet Camera in Chapter 1.
-
Page 15: Setup Using The Windows Wizard
Setup using the Windows Wizard Initial setup should be performed using the supplied Windows-based setup Wizard. This program can locate the Internet Camera even if its IP address is invalid for your network. You can then configure the Internet Camera with appropriate TCP/IP settings for your LAN. Subsequent administration can be performed with your Web browser, as explained in Chapter 5 - Web-based Management. - Page 16 • Select the desired Camera from the list on the left. The current settings for the selected Camera will be displayed in the table on the right. • Click Next to continue. 3. You will be prompted to enter the Administrator Name and Administrator Password, as shown below.
- Page 17 Figure 7: TCP/IP Settings • Enter an unused IP Address from within the address range used on your LAN. • The Subnet Mask and Default Gateway fields must match the values used by PCs on your LAN. • The Primary DNS address is required in order to use the E-mail alert or Dynamic DNS features.
- Page 18 7. Click Next to continue to the Security screen, shown below, choose Disabled, WEP or WPA-PSK. (WPA-PSK is not available for Ad-hoc Wireless Networks.) Figure 9: Security Screen 8. If you chose WEP (64 or 128) , the following screen is shown below. Figure 10: WEP Key Settings •...
- Page 19 9. If you chose the WPA-PSK option, the following screen is shown next. Figure 11:WPA-PSK Settings • Encryption - Select the desired option. Wireless Stations must use the same method. • Pre-Shared Key - Enter the key value. Data is encrypted using a key derived from the network key.
- Page 20 Figure 13: Save Settings 12. After clicking Next, you will see the screen below. Figure 14: Final Screen Clicking the Install Utility button will install the Viewing/Recording utility described in Chapter 6 - Windows Viewing/Recording Utility. 13. Click Exit to end the Wizard. Setup is now complete.
-
Page 21: Viewing Live Video
Chapter 3 Viewing Live Video This Chapter provides basic information about viewing live video. Overview After finishing setup via the Windows-based Wizard, all LAN users can view live video using Internet Explorer on Windows. This Chapter has details of viewing live video using Internet Explorer. But many other powerful features and options are available: •... - Page 22 Figure 15: Home Screen 5. Click View Video. 6. If the Administrator has restricted access to known users, you will then be prompted for a username and password. Enter the name and password assigned to you by the Internet Camera administrator. 7.
- Page 23 Figure 17: Security Screen • Find the settings of "Download unsigned ActiveX controls", change the option to "Prompt". Figure 18: Security Settings Screen • Click "OK" button. • Click "Yes" while Warning dialog box appears. Figure 19: Warning diaglog...
-
Page 24: Connecting To A Camera Via The Internet
• Click "Apply", then "OK" button to finish the setting. After the setting is done, a "Security Warning" dialog box would appear while you select "view Video". Ensure the path and the ocx file name is correct, then click "Yes" to continue. - Page 25 Where the Internet IP address is 203.70.212.52 and the HTTP port number is 1024. Example using a Domain Name: HTTP://mycamera.dyndns.tv:1024 Where the Domain name (using DDNS in this example) is mycamera.dyndns.tv and the HTTP port number is 1024. 4. When you connect, the following screen will be displayed. Figure 21: Home Screen 5.
- Page 26 Figure 22: Internet Option Screen • Select "Security" tab, choose "Internet" zone. Click "Custom Level" button. Figure 23: Security Screen • Find the settings of "Download unsigned ActiveX controls", change the option to "Prompt".
- Page 27 Figure 24: Security Settings Screen • Click "OK" button. • Click "Yes" while Warning dialog box appears. Figure 25: Warning diaglog • Click "Apply", then "OK" button to finish the setting. After the setting is done, a "Security Warning" dialog box would appear while you select "view Video".
-
Page 28: Viewing Live Video
Viewing Live Video After installing the ActiveX component, you be able to view the live video stream in its own window, as shown below. Figure 27: View Video Screen There are a number of options available on this screen, accessed by select list, button or icon. See the table below for details. - Page 29 Snap Shot. Click this to take a single JPEG "snapshot" image of the current video. Direct P/T. Use this to move the camera to the Pan/Tilt position directly. Flip. Click this to have the image swapped top-to-bottom. Mirror. Click this to have the image swapped left-to-right. Audio On.
-
Page 30: Advanced Viewing Setup
Chapter 4 Advanced Viewing Setup This Chapter provides information about the optional settings and features for viewing video via the Internet Camera. This Chapter is for the Camera Administrator only. Introduction This chapter describes some additional settings and options for viewing live Video: •... -
Page 31: To Adjust The Video Image
To Adjust the Video Image: 1. Connect to the Web-based interface of the Internet Camera. (See Chapter 5 - Web-based Management for details.) 2. Select Administration, then Video Image. You will see a screen like the example below. Figure 28: Video Image Screen 3. - Page 32 Select the power line frequency (50Hz or 60Hz) used in your region, Power line frequency to improve the picture quality under florescent lighting. Adjustment Color Balance Select the desired option to match the current environment and lighting. Exposure If necessary, you can adjust the exposure to obtain a better image. For example, if the camera is facing a bright light, the image may be too dark.
-
Page 33: Controlling User Access To The Video Stream
Controlling User Access to the Video Stream By default, anyone can connect to the Internet Camera and view live Video at any time. If desired, you can limit access to scheduled times, and also restrict access to known users. To Control User Access to Live Video: 1. -
Page 34: Making Video Available From The Internet
Making Video available from the Internet If your LAN is connected to the Internet, typically by a Broadband Gateway/Router and Broadband modem, you can make the Internet Camera available via the Internet. You will need to configure your Router or Gateway to allow connections from the Internet to the camera. Router/Gateway Setup Your Router or Gateway must be configured to pass incoming TCP (HTTP) connections (from Internet Viewers) to the Internet Camera. -
Page 35: Http Port Configuration
Internet Camera Setup The Internet Camera configuration does NOT have be changed, unless: • You wish to change the port number from the default value (1024). • You wish to use the DDNS (Dynamic DNS) feature of the Internet Camera. HTTP Port Configuration Normally, HTTP (Web) connections use port 80. -
Page 36: Viewing Live Video Via The Internet
Figure 32: DDNS Screen 3. Operation is then automatic: • The Internet Camera will automatically contact the DDNS server whenever it detects that the Internet IP address has changed, and inform the DDNS server of the new IP address. • Internet users can then connect to the camera using the Domain Name allocated by the DDNS service provider. - Page 37 Viewing Live Video with the Viewing/Recording Utility If using the Windows Viewing/Recording Utility, the details of the Internet Camera must be entered on the Camera Setup screen. Figure 33: Add Camera from Internet See Chapter 6 - Window Viewing/Recording Utility for full details on using the Windows Viewing/Recording utility.
-
Page 38: Motion Detection Alerts
Motion Detection Alerts The Motion Detection feature can generate an Alert when motion is detected. The Internet Camera will compare consecutive frames to detect changes caused by the movement of large objects. But the motion detector can also be triggered by: •... - Page 39 • Enter details of the SMTP Server used to send the E-mail. If the Motion Detection feature is enabled, but E-mail is not enabled, then the only action when motion is detected is to log this event in the system log.
-
Page 40: Web-Based Management
Chapter 5 Web-based Management This Chapter provides Setup details of the Internet Camera’s Web-based Interface. This Chapter is for the Camera Administrator only. Introduction The Internet Camera can be configured using your Web Browser. The Internet Camera must have an IP address which is compatible with your PC. The recommended method to ensure this is to use the supplied Windows-based Wizard, as described in Chapter 2 - Basic Setup. -
Page 41: Welcome Screen
Welcome Screen When you connect, the following screen will be displayed. Figure 35: Welcome Screen The menu options available from this screen are: • View Video - View live Video using your Web Browser. See Chapter 3 - Viewing Live Video for details. -
Page 42: Administration Menu
Administration Menu Clicking on Administration on the menu provides access to all the settings for the Internet Camera. The Administration menu contains the following options: Setup • System • Network • Wireless • DDNS Video Stream • Video Image • Video Access •... -
Page 43: System Screen
System Screen After clicking Administration on the main menu, or selecting System on the Administration menu, you will see a screen like the example below. Figure 36: System Screen Data - System Screen System Settings Device ID This displays the name for the Internet Camera. This field is used for entering a description, such as the location of the Description Internet Camera. - Page 44 Choose the Time Zone for your location from the drop-down list. Time Zone If your location is currently using Daylight Saving, enable the Adjust for daylight saving checkbox. You must UNCHECK this checkbox when Daylight Saving finishes. Network Time Enable or disable the Time Server feature as required. Protocol If Enabled, the Internet Camera will contact a Network Time Server at regular intervals and update its internal timer.
-
Page 45: Network Screen
Network Screen This screen is displayed when the Network menu option is clicked. Figure 37: Network Screen Data - Network Screen Network It displays the current MAC address. MAC Address Obtain an Address If selected, the Internet Camera will obtain its IP address and related information from a DHCP Server. - Page 46 Secondary Port This sets the port number for HTTP (Web) connections to the Camera, whether for administration or viewing video. • If enabled, you can connect using either port 80 or the Secondary port. You must enter the Secondary port number (between 1024 to 65535) in the field provided.
-
Page 47: Wireless Screen
Wireless Screen This screen is displayed when the Wireless menu option is clicked. This screen will not appear in ICA-150 configure screen. Figure 38: Wireless Screen Data - Wireless Screen Wireless Network Network Type This determines the type of wireless communication used by the Internet Camera. - Page 48 Security Security System Select the desired option, and then enter the settings for the selected method: • Disabled - No security is used. Anyone using the correct SSID can connect to your network. • WEP - The 802.11b standard. Data is encrypted before transmission, but the encryption system is not very strong.
-
Page 49: Ddns Screen
DDNS Screen Many internet connections use a "Dynamic IP address", where the Internet IP address is allocated whenever the Internet connection is established. This means that other Internet users don't know the IP address, so can't establish a connection. DDNS is designed to solve this problem, as follows: •... - Page 50 Account/E-mail Enter the login name for the DDNS account. Enter the password for the DDNS account. Password/Key Set the schedule for checking if the Internet IP address has Check WAN IP Address changed. If the IP address has changed, the DDNS Server will be notified.
-
Page 51: Video Image Screen
Video Image Screen This screen is displayed when the Video Image menu option is clicked. Select the desired type: • For Computer Use: If selected, you must assign desired "Encoding" values for computer viewing use. • For Mobile Devices Use: If selected, the "Encoding" values (Resolution, Quality Control, Desired Frame Rate) will also be assigned for the best mobile viewing use. - Page 52 Select the desired frame rate for the camera. Reducing this will Desired Frame Rate lower the amount of bandwidth required by the camera. Power line Select the power line frequency (50Hz or 60Hz) used in your region, to improve the picture quality under florescent lighting. frequency Adjustment Color Balance...
-
Page 53: Video Access Screen
Video Access Screen This screen is displayed when the Video Access option on the Administration menu is clicked. Figure 41: Video Access Screen Data - Video Access Screen Video Access • If enabled - Camera is available during the scheduled periods, Enable Scheduled and unavailable at other times. - Page 54 Enter the start time using a 24 hr clock. Start Time End Time Enter the end time using a 24 hr clock. Click this button to add a new schedule.
-
Page 55: User Database Screen
User Database Screen This screen is displayed when the User Database option on the Administration menu is clicked. Figure 42: User Database Screen Data - User Database Screen Existing Users User List This displays all users you have entered into the User database. If you have not entered any users, this list will be empty. -
Page 56: Pan/Tilt Screen
Pan/Tilt Screen This screen is displayed when the Pan/Tilt option on the Administration menu is clicked. Figure 43: Pan/Tilt Screen Data – Pan/Tilt Screen Pan/Tilt Enable Pan/Tilt Enable to select the desired option to control who one can use the camera's Pan/Tilt function. - Page 57 Preset Point Position Screen This screen is displayed when the Preset Point Position button on the Pan/Tilt screen is clicked. Figure 44: Preset Point Position Screen Data –Preset Point Position Screen Set Position Set the desired position through adjusting the control panel. Calibration Click this button to reset the calibration of Pan/Tilt area.
-
Page 58: Motion Detection Screen
Motion Detection Screen This screen is displayed when the Motion Detection option on the Administration menu is clicked. Figure 45: Motion Detection Screen Data – Motion Detection Screen Motion Detection Motion Detection Alerts can be sent when motion is detected. Select the desired option: •... - Page 59 Use this to ensure your E-mail inbox or SMTP Server is not flooded Alert Idle Time with alerts. Select the desired time delay between alerts. Detection Schedule Scheduled Periods This displays all periods you have entered into the database. If you have not entered any periods, this list will be empty.
-
Page 60: E-Mail Alerts Screen
E-Mail Alerts Screen This screen is displayed when the E-Mail Alerts option on the Administration menu is clicked. Figure 46: E-Mail Alerts Screen Data – E-Mail Alerts Screen E-Mail Alerts Enter at least one (1) E-Mail address; the 2nd and 3rd addresses are E-mail Address optional. - Page 61 Select the desired Authentication type for the SMTP Server. Authentication SMTP Login name Enter your login name for the SMTP Server. SMTP Password Enter your password for the SMTP Server. Enter the name for the POP Server. POP server name...
-
Page 62: Maintenance Screen
Maintenance Screen Figure 47: Maintenance Screen Data - Maintenance Screen Administrator Login Administrator Enter the name for the Administrator here. Spaces, punctuation, and special characters must NOT be used in the name. Administrator The password for the Administrator. Password Verify Password Re-enter the password for the Administrator, to ensure it is correct. - Page 63 This does NOT stop the Restore process if it has started. It only clears Clear File Name the input for the "Restore Configuration File" field. Buttons Defaults Click Defaults button to reloads all default settings on the camera. Restart Click Restart button to restarts the camera.
-
Page 64: Status Screen
Status Screen Figure 48: Status Screen Data - Status Screen System Device Name This shows the name of the Internet Camera. Description This shows the description of the Internet Camera, such as location. F/W version The version of the current firmware installed. Network MAC Address The current IP address of the Internet Camera. - Page 65 This shows how many viewers are currently viewing the Video stream. Current Viewers Buttons Refresh Update the log and any other data on screen.
-
Page 66: Log Screen
Log Screen This screen displays a log of system activity. Figure 49: Log Screen Data – Log Screen System Log This is a log of system activity. Enable Syslog Check the box to enable the System Log Service feature. Service Syslog Server Enter the address of the Syslog Server. -
Page 67: Windows Viewing/Recording Utility
Chapter 6 Windows Viewing/Recording Utility This Chapter describes how to view and record the live video stream generated by the Internet Camera, using the supplied Windows utility. Overview The recommended method to view video is to use the supplied Windows Viewing/Recording utility. -
Page 68: System Tray Icon
System Tray Icon When started, the program will create an icon in the Windows system tray on the taskbar, as shown below. Figure 51: System Tray Icon This Icon has the following functions: • Double-click - This will display the version number. •... -
Page 69: Camera Setup
Camera Setup To define a camera and associate it with a Channel Number. 1. Click the Setup button on the main screen. You will see a screen like the example below. Figure 53: Camera Setup Screen 2. Select the desired Channel number in the left (No.) column. 3. -
Page 70: Adding Cameras On The Internet
This will normally display "80". Only change this if requested to do so Port Number by the Internet Camera Administrator. Login The camera Administrator can require that users provide a username and password before being allowed to view the live video. •... - Page 71 To associate a camera with the current Channel: 1. Enter the Camera Data on the panel on the right. See below for details. 2. If desired, click the Test button to check that a connection and login can be performed successfully.
-
Page 72: Main Screen
Main Screen You can view live video in the main screen. The built-in software can let you view up to 9 cameras on a single computer screen at one central location. The Icons allow you to control the cameras and video streams. Channel Indicator. - Page 73 stream can be selected at any time.) If the camera does not support audio, or if audio is disabled on the camera, this option is unavailable. Speaker Volume - For Cameras that feature audio, click this bar and move its endpoint to raise or lower the volume.
-
Page 74: Recording Video
Recording Video You can record Video while watching, or schedule recordings to occur when you are absent. Recordings are stored in a standard Microsoft ASF file format, and can be played using Microsoft Media Player. Before doing any recording, you should review the recording settings to ensure they are suitable for your PC. - Page 75 Preferences This screen is displayed after clicking the Preferences tab on the Setup screen. If necessary, change these settings to suit your environment. Figure 56: Preferences Screen Data - Preferences Recording Paths Recording This is the Drive and Folder on your PC where recorded files will be placed.
- Page 76 Disk Allocation for Each Camera Recording Total Disk Space This displays the total size of the disk selected for storing recordings. This displays the available space of the disk selected for storing Available Disk Space recordings. Enable Disk space Enable this if you wish to limit the disk space used by video recordings.
-
Page 77: Using File Finder
Using File Finder To access the saved files of the Camera, click Files button in the Main screen, then you will see the following screen. Figure 57: File Finder Screen Searching Recorded Video Files Recorded File Category. Select the type of the recorded file from the drop-down list that you wish to view. -
Page 78: Troubleshooting
Chapter 7 Troubleshooting This chapter covers the most likely problems and their solutions. Overview This chapter covers some common problems that may be encountered while using the Internet Camera and some possible solutions to them. If you follow the suggested steps and the Internet Camera still does not function properly, contact your dealer for further advice. - Page 79 Enter the Administrator ID and Password set on the Maintenance screen. If you are just trying to view Video, the User Name/Password prompt indicates that the Administrator has restricted access to specified users. Ask the Administrator for your User Name and Password. Problem 4 I can't connect to the Internet Camera using a Wireless connection.
-
Page 80: Appendix A Specifications
Appendix A Specifications Internet Camera Model Internet Camera Dimensions 107mm (W) * 170mm (H) * 100mm (D) 0 ° C to 40 ° C Operating Temperature -20 ° C to 70 ° C Storage Temperature Network Protocols: TCP/IP, DHCP, SMTP, NTP, HTTP, UPnP (Discovery only) Network Interface: 1 Ethernet 10/100Base-TX (RJ45) LAN connection Wireless interface... -
Page 81: Copyright Notice
Copyright Notice Many software components are covered by the GNU GPL (General Public License). Some are covered by other Licenses as listed in the table below. Details of each applicable license are contained in the following section. No Warranty THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - Page 82 ntp-4.1.71 license Copyright (c) David L. Mills 1992-2001 Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appears in all copies and that both the copyright notice and this permission notice appear in supporting documentation, and that the name University of Delaware not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission.
- Page 83 cron license Copyright (c) 1989 The Regents of the University of California. All rights reserved. This code is derived from software contributed to Berkeley by Paul Vixie. Redistribution and use in source and binary forms are permitted provided that the above copyright notice and this paragraph are duplicated in all such forms and that any documentation, advertising materials, and other materials related to such distribution and use acknowledge that the software was developed by the University of California, Berkeley.
-
Page 84: Gnu General Public License
GNU General Public License GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. - Page 85 translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program).
- Page 86 b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange;...
- Page 87 practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.
-
Page 88: Gnu Lesser General Public License
Lesser GNU General Public License GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. - Page 89 Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license.
- Page 90 The "Library", below, refers to any such software library or work which has been distributed under these terms. A "work based on the Library" means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language.
- Page 91 In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3.
- Page 92 6. As an exception to the Sections above, you may also combine or link a "work that uses the Library" with the Library to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer's own use and reverse engineering for debugging such modifications.
- Page 93 8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License.
-
Page 94: End Of Terms And Conditions
14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. -
Page 95: Appendix B Streaming Video/Audio Solution
Appendix B Streaming Video/Audio Solution Overview Streaming video is a sequence of "moving images" that are sent in compressed form over the Internet and displayed by the viewer as they arrive. With streaming, a Web user does not have to wait to download a large file before seeing the video or hearing the sound. Instead, the media is sent in a continuous stream and is played as it arrives.
Need help?
Do you have a question about the ICA-550W and is the answer not in the manual?
Questions and answers