Appendix B: Ping Ip Address - Planet ICA-108 User Manual

Appendix B: PING IP Address

The PING (stands for Packet Internet Groper) command is used to detect whether a specific IP
address is accessible by sending a packet to the specific address and waiting for a reply. It's
also a very useful tool to confirm IR IP Camera installed or if the IP address conflicts with any
other devices over the network.
If you want to make sure the IP address of IR IP Camera, utilize the PING command as
follows:
Start a DOS window.
Type ping x.x.x.x, where x.x.x.x is the IP address of the IR IP Camera.
The replies, as illustrated below, will provide an explanation to the problem.
If you want to detect any other devices conflicts with the IP address of IR IP Camera, also can
utilize the PING command but you must disconnect the IR IP Camera from the network first.
66