Programming Selectable Options - Code Alarm F60 Owner's Manual

Programming Selectable Options
Note: Transmitters must be programmed prior to these steps.
1. Repeat steps 1·4 of Adding Remote Controls to your System
(page 9).
2. Press and release the emergency override button.
The horn will sound four (4) times. This indicates that the unit has
entered the Key/ess Options Programming mode.
3. Press the Find/Panic button to advance to the next feature.
The horn will sound a number of times to indicate the number of
the option.
4. Press the Arm button to turn the option on or all. The vehicle
status indicator on the dashboard indicates whether an option
is on or all .
• lithe selected option is ON, the indicator will light.
'If the selected option is OFF, the indicator will turn off.
·The status indicator will tum on or 011 when an option is changed.
5. When changes are complete, press and release the emergency
override button to continue to the next option bank. (Horn will
sound five (5) times.)
6. To reset all options back to factory defaults, press the Unlock!
Disarm button.
Note: Option Bank four (4) Installer Options will never reset.
7. Turn ignition off to exit programming.
See Options Chart on page 15.
101101-4 F6Q-SS.p65
13 9113101,12:14 PM
13