Page 2
Starting the Vehicle with the Remote Starter ..........3 Stopping the Vehicle While It Is Running Via the Remote Starter .... 4 Operating Your Vehicle While the CSM-3 is Engaged ....... 4 Engaging the CSM-3 When Exiting Your Vehicle ........4 Status Indication ..................
Page 3
If the vehicle does not start... If the vehicle does not start on the first attempt, the CSM-3 will pause 5 seconds, then try 3 more times to start the vehicle (a total of four attempts). On each attempt the CSM-3 will crank the starter one second longer than the previous attempt.
Page 4
4. You may lock the doors with your remote transmitter while the vehicle is running via the remote starter. Status Indication The CSM-3 uses the vehicle parking lights to indicate the system's current status while operating: • 1 flash - Vehicle is about to start •...
Adding Remote Transmitters to Your System Note: Each CSM-3 module has four “slots”, or memory locations, to store remote transmitter codes, giving it the ability to operate from up to four remote transmitters.
Page 6
System Maintenance Programming Keyless Entry Characteristics Press and hold the brake pedal. Turn the ignition on and off four (4) times, then release the brake pedal. If done correctly, the unit will respond by flashing the parking lights four (4) times. (From inside the vehicle, you will hear four (4) ‘clicks’...
Page 7
CODE-ALARM, INC. LIMITED LIFETIME WARRANTY A CODE-ALARM, INC. (“CODE”) vehicle security system sold to a retail consumer purchaser by an authorized dealer of CODE and installed by an authorized dealer of CODE is warranted by CODE to the original retail consumer purchaser to be free from defects in workmanship and materials for the lifetime of the vehicle in which the security system was originally installed.
Need help?
Do you have a question about the CSM-3 and is the answer not in the manual?
Questions and answers