Tips For Using Icanview220/220W; Sensor-In And Relay-Out - iCanTek iCanView220 User Manual

iCanView220/220W User's Guide

6. Tips for Using iCanView220/220W

6.1. Sensor-IN and Relay-OUT

Use the Sensor-In and Relay-Out Cable to connect various sensing and alerting devices.
Examples of sensing devices are infrared sensors, motion sensors, heat/smoke sensors, magnetic
contact sensors, etc. Use the *Relay-Out connector for connecting device such as loud speakers,
flashing lights, or access control devices. * Make sure to follow the recommended current
limitations for this relay (AC/DC 30V @ 1 amp). An auxiliary relay may be needed.
Cable color
red
black
orange
brown
yellow
1. Sensor-IN
The sensor type is configured in Administrative Mode( Ref. 5.5 & 5.6).
Connect the two sensors wires to the input lines, "+" and "-" pins.
Figure 6-2 shows the input circuit of "Alarm In".
Description
Sensor In (-)
Sensor In (+)
Relay out
Relay out
Relay out
Figure 6-1. ALARM-IN/ALARM-OUT Cable
Misc.
NC/NO selectable in admin mode.
NC/NO selectable in admin mode.
Normal close
Common
Normal open
Rev.1.0 (Aug. 2006)
47