Trouble Shooting - iCanTek iCanView220 User Manual

iCanView220/220W User's Guide
-
+
Relay
iCanView220/220W supports relay load output that directly drive a maximum
load of 30V AC/DC at 1A. Higher current circuits require an additional auxiliary relay.

6.2. Trouble Shooting

1. After iCanView220/220W is successfully installed.
• iCanView220/220W View Mode: Channel name, or video does not display, eventually
displaying timeout message is shown up.
Double-Check the iCanView220/220W's power and network connections.
To check if the network is properly operating, open the browser and try to connect to any
server.
Example) http://www.yahoo.com
Or open the MS-DOS Prompt and type the following.
ping
www.yahoo.com
Next press Enter. If you see the "
properly.
Relay Switch Power Supply
1V~30VDC/AC,1A
Relay1
Relay1
Reply from
Device
Supply(30V
Optional
Relay Switch
Device
Supply
VDC/AC,1A
..." message, the network is working
Rev.1.0 (Aug. 2006)
Alarm
Out
Power
~)
Alarm
Out
Power
(1~30
)
50