Table of Contents
Advertisement
Getting Started
Installation
Connecting the DisplayPort Detective Plus
STOP: Before connecting the DisplayPort Detective Plus, the unit
must be programmed with an EDID. See
more information, before continuing.
1.
Connect the included DisplayPort cable from the DisplayPort source to the DP In
port on the detective. If using a different DisplayPort cable, this cable should not
exceed 30 feet (10 meters) in length.
2.
Use another DisplayPort cable to connect the display (or other sink) to the
DP Out port on the detective. The DisplayPort cable should not exceed 50 feet
(15 meters) in length.
3.
Connect the included 5V DC power supply to the power receptacle on the detective.
4.
Connect the power supply to an available electrical outlet.
Sample Wiring Diagram
Computer
DisplayPort Detective Plus
page | 5
EDID Programming
DISPLAYPORT CABLE
Monitor
EXT-DP-EDIDP
Page Title
for
Advertisement
Table of Contents
