Summary of Contents for Clever Acoustics CRSP23-BGS 25
Page 1
CRSP23 - BGS 25 White CRSP24 - BGS 25 Black CRSP35 - WPS 25 Weatherproof White CRSP36 - WPS 25 Weatherproof Black CRSP25 - BGS 35 White CRSP26 - BGS 35 Black CRSP37 - WPS 35 Weatherproof White CRSP38 - WPS 35 Weatherproof Black CRSP27 - BGS 50 White CRSP28 - BGS 50 Black CRSP39 - WPS 50 Weatherproof White...
Page 2
WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all the parts are present, and have been received in good condition. Notify the dealer immediately and retain the packaging material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling.
Page 3
IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorised modification to the equipment. • Never leave any cables lying around. • Do not use the unit near stoves, heaters, radiators, or other heat producing devices. •...
Page 4
Features • 2-way speakers • Complete with mounting brackets • Supplied in pairs • Available in Black and White • Optional mounting by M6 screw sockets • Robust housing • WPS Series suitable for installation outside in sheltered conditions Specifications: BGS 25 BGS 35 BGS 50...
Page 5
Overview: BGS 25/WPS 25: BGS 35/WPS 35: BGS 50/WPS 50: Identification: 1, Binding post connectors 2, Angle adjustment knob 3, Bracket 4, Wall mounting holes - Max 6mm fixing Wall Installation: Before attaching the speaker, make sure that the installation area can hold a minimum point load of 10 times the installations weight.
Page 6
Installation: • DO NOT run microphone cables near mains, data, telephone or 100V line cables. • ENSURE that all loudspeakers are in-phase. • ENSURE that there are no short circuits on the loudspeaker line before connection of the amplifier. • Where it is intended to use multiple low impedance speakers to cover an area, the speakers must be wired in a series/parallel arrangement in such a way as to present tho correct load to the amplifier.
Need help?
Do you have a question about the CRSP23-BGS 25 and is the answer not in the manual?
Questions and answers