Yoyocam Settings - YOYOMOTION YOYOCam G2 User Manual

0 Every day
1 Monday
2 Tuesday
3 Wednesday
4 Thursday
5 Friday
6 Saturday
7 Sunday
8 Monday to Friday
To enable/disable periodic image sending:
Turn On: #115#1#
Response: Periodic sending of images - enabled
Turn Off: #115#0#
Response: Periodic sending of images - disabled

YOYOCam Settings

Master, Users & Guests
YOYOCam has three levels of user:

Master: has complete control over YOYOCam, receives alarms & notifications, and can
request images.

User: has some control over YOYOCam and can request images.

Guest: can request images using the Password supplied by the Master.
Master
The Master has complete control over YOYOCam and can use any command. The Master sets up
Users and configures YOYOCam as required. There is one Master. If necessary, someone else can
be the initial Master and perform the configuration, then use the Change Master Number command to
hand YOYOCam to the person who will be Master.
YOYOCam leaves the factory with no Master user defined. Performing a Factory Reset operation
also clears the Master user, and it must be set again as if for the first time.
To set Master user for the first time:
From your mobile phone, either:
1. Send an SMS with text #00# to YOYOCam.
2. YOYOCam confirms your phone as Master by SMS, Välkommen till YOYOCam. Lösen är
'1234', (Welcome to YOYOCam. The default password is 1234.) You are now the Master and
have full control over YOYOCam.
(Default)
18