Table of Contents
Advertisement
Error Responses
MASTER phone number
already exists
To change Master number:
Command:
#14#NewMasterNumber#
Example:
#14#+46702222222#
Response:
New MASTER phone number is +46702222222
Note: response is sent to the old master number. No response is sent to the new Master number.
WARNING: Be very careful to send the correct NewMasterNumber. If you get it wrong you must
either send this command from the number you entered in error or perform a Factory Reset and
reconfigure YOYOCam from the beginning.
User
The Master can add up to 10 users.
To add a user:
Command:
#06#UserNumber#
Example:
#06#+46702222222#
Response:
+46702222222 USER phone number has been added
Error Responses
UserNumber USER phone
number already exists
USER phone number list is
full. Please delete old
numbers first.
To add several users in one command:
Command:
#06#UserNumber1#UserNumber2#UserNumber3#UserNumber4# ....
Example:
#06#+46702222222#+46703333333#+46704444444#
Response:
+46702222222
+46703333333
+46704444444
USER phone number has been added
YOYOCam already has a Master number configured.
Note: YOYOCam gives this response if you send #00# from the
configured Master phone.
From the Master's or a User's mobile phone, you can send the #07#
Check Status & Settings command to get the Master number. If you
have lost the Master number, you must perform a Factory Reset and
reconfigure YOYOCam from the beginning.
UserNumber has already been set up.
Note that YOYOCam treats the national and international format of
the same number as different and will not issue this error if both
formats are sent.
YOYOCam already has 10 User numbers set up. Use #07# to check
and then delete unwanted number(s) to make space for the new
number(s).
19
Advertisement
Table of Contents
