YOYOMOTION YOYOCam G2 User Manual page 28

Gsm remote surveillance camera
Table of Contents

Advertisement

To set number of alarms before auto-disarm:
Command:
#139#Times#
Example:
#139#3#
Response:
Disarm the YOYOCam after 3 alarms
Note: Times must be at least 1.
Note: After the given number of alarms, YOYOCam auto-disarms and sends an SMS:
YOYOCam has auto-disarmed
Note: The counter is reset each time YOYOCam is manually disarmed or armed.
To enable or disable auto-disarm:
Turn On:
#138#1#
Response:
Disarm the YOYOCam after several alarms - enabled
Turn Off:
#138#0#
Response:
Disarm the YOYOCam after several alarms - disabled
Language
English:
#127#1#
Response:
Language set to English
Turn Off:
#127#0#
Response:
Svenska - installt
Check Settings & Status
View Current Settings
To view current settings:
Command:
#07#
Example Response:
Disarmed
SMS upon alarm - disabled
MMS upon alarm - enabled
Motion detection - disabled
Infrared lights - on
Notification by e-mail upon motion detection alarm - disabled
Voice call to preset number upon emergency alarm - enabled
Voice call to preset number upon alarm - enabled
(Default)
(Default)
28

Advertisement

Table of Contents
loading

Related Products for YOYOMOTION YOYOCam G2

Table of Contents