Table of Contents
Advertisement
Error Responses as above
To find out which User numbers are set:
Command:
#07#
Response:
MMS message including YOYOCam status and User number(s)
To delete a user:
Command:
#113#UserNumber#
Example:
#113#+46703333333#
Response:
+46703333333 USER phone number has been deleted
To delete several Users in a single command:
Command:
#113# UserNumber1#UserNumber2#UserNumber3#UserNumber4# ....
Example:
#113#+46704444444#+46705555555#+46706666666#
Response:
+46704444444
+46705555555
+46706666666
USER phone number has been deleted
Guest Users & Password
The Master can invite guests to access YOYOCam. Guests can request and view images from
YOYOCam. The Master does not need to pre-define Guests to YOYOCam. Instead, the Master gives
guests YOYOCam's phone number and Password (default 1234). Guests have to include the
password in the commands they send to YOYOCam. To withdraw access from Guests, the Master
simply changes the Password.
To change the Guest Password:
Command:
#04#OldPassword#NewPassword#
Example:
#04#1234#6789#
Response:
Password was successfully changed to 6789
Error Responses
Wrong password
You are not authorized to use this
command
Password should be a 4 digit number
Note: You should change the default password when you first set up YOYOCam; do not leave it set
at the default 1234.
Note: If you have lost the Password, you must perform a Factory Reset and reconfigure YOYOCam
from the beginning.
OldPassword is incorrect
Only the Master can change the password
Password must be exactly 4 digits long
20
Advertisement
Table of Contents
