Table of Contents
Advertisement
Factory Reset
If the Master phone is lost or you want to set up YOYOCam again from the beginning, you can use
Factory Reset to set all settings and parameters back to the factory default. Following Factory Reset
you will need to re-pair the remote controls and any remote sensors, re-enter any mobile network
(MMS) settings and reconfigure all users etc.
To perform Factory Reset (Reset Key method):
1. Switch Off YOYOCam and wait at least 20 seconds.
2. Press and hold the Reset key.
3. Switch on YOYOCAM while the Reset key is still pressed.
4. After approx. 10 seconds, YOYOCam bleeps and the indicator LED goes green
then flashes red
5. You may now release the Reset key.
To perform Factory Reset by SMS (Master only)
Command:
#08#Password#
Response:
YOYOCam has been reset to default settings
39
and
Advertisement
Table of Contents
