Download  Print this page

Changing The Monitor Settings With The Buttons Of The Control Panel - Fujitsu B19-7 LED Operating Manual

Hide thumbs

Advertisement

Operation
Changing the monitor settings with the buttons
of the control panel
With the OSD menu not activated, you can make the following settings directly.
Call up OSD menu
Activate/deactivate ECO operating mode
Select input signal (digital/analog)
Adjust volume
Adjust brightness
Perform auto-adjustment of the monitor with analog input
ON/OFF switch with power indicator
Select OSD language
After the first switch on and after the monitor has been reset to the factory settings,
the selection screen for the language appears:
► Press the
ECO
► Press the
MENU
After selecting the OSD language for the first time, you can change
it at any time in the OSD.
Activate/deactivate ECO operating mode
The power consumption of the device can be decreased by reducing
the brightness of the picture.
► Press the
ECO
The message ECO Mode on or ECO Mode off is displayed.
If the ECO operating mode is activated, the following OSD settings are changed:
Colour
Brightness
After the ECO operating mode is switched off, the brightness previously set by the user is restored.
22
/
button or the
INPUT
/
button to confirm or the
button to switch the ECO operating mode on or off.
6,500 K
reduced
/
button to select the desired language.
/
button to cancel.
AUTO
Fujitsu

Advertisement

loading

  Related Content for Fujitsu B19-7 LED