Changing the monitor settings
When putting the monitor into operation for the ﬁrst time, the screen display should
be optimally adapted to the display adapter used.
Changing the monitor settings with the buttons
of the control panel
The buttons of the control panel have two functions. With the OSD menu not
activated, you can make the following settings directly:
1 = SELECT / MENU button
2 = Forward / Mute button
3 = Back / INPUT button
Performing auto-adjustment of the monitor
► Press the
EXIT / AUTO
The Auto Processing message appears
Picture quality and position are set to optimum values for your system.
Selecting the input signal (D-SUB/DVI_D)
► Press the Back /
► Press the Forward / Mute button or the Back /
monitor connection (analog D-SUB or digital DVI-D).
This setting window can also be called when the OSD menu is locked.
► Press the Mute button to switch the sound off and on again.
The Action was executed message appears.
A26361-K1240-Z120-7619, edition 1
button for about 1 second.
button to open the Input select setting window.
4 = EXIT / AUTO button
5 = ON/OFF switch
6 = Power indicator
button to select the desired