Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
3-1/2 HORSEPOWER
14" INDUSTRIAL
CUT-OFF SAW
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2013 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Cut-Off Wheel sold separately.
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
REV 15i
Advertisement
Table of Contents
Related Manuals for Chicago Electric 61481
Summary of Contents for Chicago Electric 61481
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Table Of Contents
4. DON’T USE IN DANGEROUS ENVIRONMENT. to do a job for which it was not designed. Don’t use power tools in damp or wet locations, or expose them to rain. Keep work area well lighted. Page 2 For technical questions, please call 1-888-866-5797. Item 61481... - Page 3 12. SECURE WORK. Use vise to hold work when leave tool until it comes to a complete stop. practical. It’s safer than using your hand and it frees both hands to operate tool. Item 61481 For technical questions, please call 1-888-866-5797. Page 3...
- Page 4 9. Do not use an adapter to connect this tool to a different outlet. 5. Use only 3-wire extension cords that have 3-prong grounding plugs and 3-pole receptacles that accept the tool’s plug. Page 4 For technical questions, please call 1-888-866-5797. Item 61481...
- Page 5 Unapproved safety equipment may not provide adequate protection. Eye protection must be ANSI-approved and breathing protection must be NIOSH-approved for the specific hazards in the work area. Item 61481 For technical questions, please call 1-888-866-5797. Page 5...
-
Page 6: Vibration Safety
If you feel any medical or physical symptoms related to vibration (such as tingling, numbness, and white or blue fingers), seek medical advice as soon as possible. SAVE THESE INSTRUCTIONS. Page 6 For technical questions, please call 1-888-866-5797. Item 61481... -
Page 7: Specifications
Vise Capacities 9‑1/2″ (2nd Setting) Arbor Size 1″ 5001571 Setup - Before Use Functions Handle Motor Housing Swing Guard Screw Base Vise Handle Trigger Lock Depth Adjustment Lock Bolt Ball Trigger Item 61481 For technical questions, please call 1-888-866-5797. Page 7... -
Page 8: Operation
Lock, loosen the Arbor Bolt (54). 45° 45° 6. Remove the Arbor Bolt, the Flange Washer (96), the Outer Flange (55), and the cut-off wheel. See Figure B. Figure C: Cut-Off Wheel Ring-Test Page 8 For technical questions, please call 1-888-866-5797. Item 61481... -
Page 9: Depth Adjustment
3. After adjustment, tighten the Nut (6) down against the Bracket (14) to lock the adjustment in place. Depth Adjustment Bolt (16) Bracket Nut (6) (14) Figure E: Depth Adjustment Item 61481 For technical questions, please call 1-888-866-5797. Page 9... -
Page 10: Work Piece And Work Area Set Up
3. To reposition the Angle Scale for a wider workpiece, remove both of the Bolts, and reattach the Angle Scale at the upper two screw holes. See Figure F. Angle Scale (35) Figure F: Angle Scale Page 10 For technical questions, please call 1-888-866-5797. Item 61481... -
Page 11: General Operating Instructions
9. Clean, then store the tool indoors b. Unplug the unit. out of children’s reach. c. Wait until the cut-off wheel comes to a full stop. d. Remove the workpiece. Item 61481 For technical questions, please call 1-888-866-5797. Page 11... -
Page 12: Maintenance
Do not use wheels drawers. Keep storage area dry and above that have been dropped or bumped. freezing. Any grinding or cut-off wheels exposed to humidity or freezing temperatures must not be used. Page 12 For technical questions, please call 1-888-866-5797. Item 61481... -
Page 13: Troubleshooting
If an extension cord is needed, use one with the proper diameter for its length and load. See Extension Cords in GROUNDING section. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Item 61481 For technical questions, please call 1-888-866-5797. Page 13... -
Page 14: Parts List And Diagram
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 14 For technical questions, please call 1-888-866-5797. Item 61481... -
Page 15: Assembly Diagram
Assembly Diagram Item 61481 For technical questions, please call 1-888-866-5797. Page 15... -
Page 16: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.