Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
10" SLiDinG cOMpOunD
MITER SAW
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1‑888‑866‑5797 as soon as possible.
©
Copyright
2023 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Blade sold separately.
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
23i
61971
Advertisement
Related Manuals for Chicago Electric 61971
Summary of Contents for Chicago Electric 61971
- Page 1 (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. 61971 10″ SLiDinG cOMpOunD MITER SAW Blade sold separately.
-
Page 2: Table Of Contents
Cluttered or dark areas invite accidents. create sparks which may ignite the dust or fumes. c. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. Page 2 For technical questions, please call 1-888-866-5797. Item 61971... -
Page 3: Safety
The correct power tool will do the job better and safer at the rate for which it was designed. Item 61971 For technical questions, please call 1-888-866-5797. Page 3... - Page 4 A level and firm work surface reduces the risk of the mitre saw becoming unstable. Page 4 For technical questions, please call 1-888-866-5797. Item 61971...
- Page 5 To reduce vibration, maintain the tool as explained in this manual. If any abnormal vibration occurs, stop use immediately. Item 61971 For technical questions, please call 1-888-866-5797. Page 5...
- Page 6 (See table a.) wire size required. (See table a.) Page 6 For technical questions, please call 1-888-866-5797. Item 61971...
- Page 7 Do not cover ventilation ducts. Keep flammable objects away. WARNING marking concerning n 0 xxxx/min. No Load Revolutions per Minute (RPM) Risk of Electric Shock. Properly connect power cord to appropriate outlet. Item 61971 For technical questions, please call 1-888-866-5797. Page 7...
-
Page 8: Specifications
The upper edge of the Extensions will be level rear of the Saw Head Assembly. with the surface of the saw. This provides a wider base for the work material to rest on. Workpiece extension Support Support Bolt Page 8 For technical questions, please call 1-888-866-5797. Item 61971... - Page 9 The power cord must reach the work 2. There must not be objects, such as utility lines, area with enough extra length to allow nearby that will present a hazard while working. free movement while working. Item 61971 For technical questions, please call 1-888-866-5797. Page 9...
-
Page 10: Operation
Bolt Guard Guard plate arbor Bolt Guard plate Bolt note: The Arbor Bolt has a left hand thread, so it loosens by turning clockwise. 4. Remove the Connecting Rod Bolt. Page 10 For technical questions, please call 1-888-866-5797. Item 61971... - Page 11 Handle 1/2 turn counterclockwise. See Adjusting the Bevel Angle on page 15. 2. Move the blade assembly left to the desired angle. You can read the angle on the Bevel Angle Indicator. Item 61971 For technical questions, please call 1-888-866-5797. Page 11...
- Page 12 If the workpiece is not supported, it will bind which can be raised to make repetitive cuts. the blade and may cause the material to kick back, potentially causing injury. Page 12 For technical questions, please call 1-888-866-5797. Item 61971...
- Page 13 Press straight down, “chopping” the material. Do not bear down on the material — u se light downward pressure. If the material binds the blade, release the Trigger. Item 61971 For technical questions, please call 1-888-866-5797. Page 13...
-
Page 14: Maintenance
Recheck The square must contact the surface of the one last time, then proceed to work. blade, not the teeth, for an accurate reading. Page 14 For technical questions, please call 1-888-866-5797. Item 61971... - Page 15 Blade clears the Kerf Board. Tighten 3. Install a new Kerf Board. Replace the four the four screws holding the Kerf Board in place. screws and tighten them slightly. Item 61971 For technical questions, please call 1-888-866-5797. Page 15...
- Page 16 See Extension Cords in Grounding section on page 6. follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Page 16 For technical questions, please call 1-888-866-5797. Item 61971...
- Page 17 Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 193175369956 when ordering parts. Item 61971 For technical questions, please call 1-888-866-5797. Page 17...
-
Page 18: Parts List And Diagram
Screw St4.2*12 Carry Handle Line Buckle Screw M5*50 Screw M6*10 Screw St4.2*14 Knob Cable Pad Self‑Locking Pin Spring Cable Self‑Locking Pin Cable Sheath Elastic Cylindrical Pin Screw St4.2*18 Screw M6*8 Page 18 For technical questions, please call 1-888-866-5797. Item 61971... - Page 19 Diagram Item 61971 For technical questions, please call 1-888-866-5797. Page 19...
-
Page 20: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.