Do you have a question about the 61970 and is the answer not in the manual?
Questions and answers
David W Thompson
May 29, 2025
how to replace the spring in the blade guard model 61970
1 comments:
Mr. Anderson
May 29, 2025
To replace the spring in the blade guard for Chicago Electric model 61970:
1. Turn off the power switch and unplug the tool from the electrical outlet. 2. Raise and hold the Lower Guard (part 116) out of the way. 3. Loosen the Guard Pivot Bolt (part 115) until it disengages the Guard Pivot Plate (part 113). 4. Carefully remove the old spring. 5. Install the new spring in the same position. 6. Reassemble the Guard Pivot Plate and tighten the Guard Pivot Bolt. 7. Ensure the Lower Guard moves freely and closes instantly.
Only certified and licensed technicians should perform this replacement.
This answer is automatically generated
Carl
March 23, 2025
I would like a replacement for item 37 fence ( black )
1 comments:
Mr. Anderson
March 23, 2025
To find a replacement for item 37 (Fence) for the Chicago Electric part number 61970, you should contact the manufacturer or distributor. The manual advises that all repairs and parts replacements should be handled by certified and licensed technicians. You can reach out to the technical support team at the provided phone number: 1-888-866-5797.
This answer is automatically generated
Doyle
March 7, 2025
I need the lower blade guard for item61970. Sn 370331701. Can you help
1 comments:
Mr. Anderson
March 7, 2025
You can find a lower blade guard for the Chicago Electric Miter Saw, part number 61970, at an online store that imports from the USA. The item is listed as "Chicago Electric Harbor Freight Miter Saw Lower Guard," and it fits only models 61970 and 61776. It is available in stock with item number 12841838.
4. DON’T USE IN DANGEROUS ENVIRONMENT. to do a job for which it was not designed. Don’t use power tools in damp or wet locations, or expose them to rain. Keep work area well lighted. Page 2 For technical questions, please call 1-888-866-5797. Item 61970...
Page 3
It’s safer than using your hand and it frees both hands to operate tool. 21. NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Don’t leave tool until it comes to a complete stop. Item 61970 For technical questions, please call 1-888-866-5797. Page 3...
22. Do not depress the spindle lock when starting or during operation. 13. Do not use to cut logs, tree limbs, or uneven lumber. Page 4 For technical questions, please call 1-888-866-5797. Item 61970...
If you feel any medical or physical symptoms related to vibration (such as tingling, numbness, and white or blue fingers), seek medical advice as soon as possible. SAVE THESE INSTRUcTIONS. Item 61970 For technical questions, please call 1-888-866-5797. Page 5...
Mounting Use the four bolt holes provided in the Base to mount the Miter Saw to a stable support before use. Mounting hardware not included. Item 61970 For technical questions, please call 1-888-866-5797. Page 7...
Page 9
Loosen this to allow the cutting head to slide. Note: Additional functions are explained Align pin with Align pin with elsewhere in the manual. deep groove shallow groove to lock cutting head. to unlock cutting head. Item 61970 For technical questions, please call 1-888-866-5797. Page 9...
Guard Pivot Bolt. 10. WARNING! Make sure the Lower Guard (116) Figure A: Spindle Lock Location operates smoothly and properly protects from the Blade before using the Saw. Page 10 For technical questions, please call 1-888-866-5797. Item 61970...
Page 11
Figure D: Bevel Angle Adjustment Adjust the Sliding Fences (36, 38) to keep them clear of the new path of the Blade. Tighten the Sliding Fence Lock Knobs (34) after moving them. Item 61970 For technical questions, please call 1-888-866-5797. Page 11...
Page 12
Clamping the workpiece will also improve cutting accuracy by preventing the workpiece from moving during the cutting operation. Page 12 For technical questions, please call 1-888-866-5797. Item 61970...
11. To prevent accidents, turn off the tool and disconnect its power supply after use. Clean, then store the tool indoors out of children’s reach. Item 61970 For technical questions, please call 1-888-866-5797. Page 13...
Repeat the process until the Fence is adjusted accurately. 5. Once the Fence is accurately adjusted, tighten the bolts firmly in place. Recheck one last time, then proceed to work. Page 14 For technical questions, please call 1-888-866-5797. Item 61970...
Page 15
Pulleys. 3. Replace Belt if damaged according to steps below: a. Slide the old Belt off of the 4. Replace Belt Guard before use. smaller Pulley first, then remove it. Item 61970 For technical questions, please call 1-888-866-5797. Page 15...
2. Depth Stop set too shallow. 2. Adjust Depth Stop Bolt for desired depth of cut. through workpiece. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Page 16 For technical questions, please call 1-888-866-5797. Item 61970...
Page 17
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Item 61970 For technical questions, please call 1-888-866-5797. Page 17...
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 61970 and is the answer not in the manual?
Questions and answers
how to replace the spring in the blade guard model 61970
To replace the spring in the blade guard for Chicago Electric model 61970:
1. Turn off the power switch and unplug the tool from the electrical outlet.
2. Raise and hold the Lower Guard (part 116) out of the way.
3. Loosen the Guard Pivot Bolt (part 115) until it disengages the Guard Pivot Plate (part 113).
4. Carefully remove the old spring.
5. Install the new spring in the same position.
6. Reassemble the Guard Pivot Plate and tighten the Guard Pivot Bolt.
7. Ensure the Lower Guard moves freely and closes instantly.
Only certified and licensed technicians should perform this replacement.
This answer is automatically generated
I would like a replacement for item 37 fence ( black )
To find a replacement for item 37 (Fence) for the Chicago Electric part number 61970, you should contact the manufacturer or distributor. The manual advises that all repairs and parts replacements should be handled by certified and licensed technicians. You can reach out to the technical support team at the provided phone number: 1-888-866-5797.
This answer is automatically generated
I need the lower blade guard for item61970. Sn 370331701. Can you help
You can find a lower blade guard for the Chicago Electric Miter Saw, part number 61970, at an online store that imports from the USA. The item is listed as "Chicago Electric Harbor Freight Miter Saw Lower Guard," and it fits only models 61970 and 61776. It is available in stock with item number 12841838.
This answer is automatically generated
how do I adjust the lase light on item61970