Vibration Hazard - Chicago Electric 66753 Set Up, Operating, And Servicing Instructions

• do not use a dull or damaged saw
blade. Unsharpened or improperly
installed Saw Blades produce a nar-
row cut causing excessive friction,
Saw Blade binding and kickback.
push the saw blade past the
•
workpiece prior to release.
• Make sure to check the blade
Guard for proper operation. Never
disable the Guard. Do not use the
Cut Off Saw if the Guard assembly
does not operate properly. Before
each use, make sure the Blade
Guard does not touch the Saw
Blade.

vibration Hazard:

This tool vibrates during use. Re-
peated or long-term exposure to
vibration may cause temporary or
permanent physical injury, particularly
to the hands, arms and shoulders. To
reduce the risk of vibration-related
injury:
1. Anyone using vibrating tools regu-
larly or for an extended period should
first be examined by a doctor and
then have regular medical check-
ups to ensure medical problems are
not being caused or worsened from
use. Pregnant women or people
who have impaired blood circulation
to the hand, past hand injuries, ner-
vous system disorders, diabetes, or
Raynaud's Disease should not use
this tool. If you feel any symptoms
related to vibration (such as tingling,
numbness, and white or blue fingers),
seek medical advice as soon as pos-
sible.
2. Do not smoke during use. Nico-
tine reduces the blood supply to the
SKU 66753 for technical questions, please call 1-800-444-3353.
hands and fingers, increasing the risk
of vibration-related injury.
3. Wear suitable gloves to reduce the
vibration effects on the user.
4. Use tools with the lowest vibration
when there is a choice between dif-
ferent processes.
5. Include vibration-free periods each
day of work.
6. Grip tool as lightly as possible (while
still keeping safe control of it). Let
the tool do the work.
7. To reduce vibration, maintain the tool
as explained in this manual. If any
abnormal vibration occurs, stop use
immediately.
serviCe preCautiOns
1. before service, maintenance, or
cleaning:
a. turn the On/Off switch to its
"Off" position.
b. allow the engine to completely
cool.
c. then, remove the spark plug
wire(s) from the spark plug(s).
2. Keep all safety guards in place and in
proper working order. Safety guards
include muffler, air cleaner, mechani-
cal guards, and heat shields, among
other guards.
3. do not alter or adjust any part of
the equipment or its engine that is
sealed by the manufacturer or dis-
tributor. Only a qualified service
technician may adjust parts that
may increase or decrease gov-
erned engine speed.
Page 7