ProMinent Makro TZ Operating Instructions Manual page 10

Safety
Protective equipment: 1 Protective cover (piston and diaphragm version)
Page 10
• Pumps which have been used with radioactive media cannot be sent.
• Before commissioning the pump, connect the overpressure sensor and the diaphragm
rupture sensor.
CAUTION
• It is prohibited to assemble and install ProMinent
have not been approved or recommended by ProMinent. Damage to persons and
property may ensue.
• When metering aggressive media, check the resistance of the pump materials
®
(See ProMinent resistance list in the Equipment Catalogue or on www.prominent.com)
• Danger of burns from hot power end in the event of a fault.
• Observe all national directives which apply to installation!
1
Fig. 1 Makro TZMa
2 Flange cover
Fig. 2 Safety relief valve (*) on TZHa liquid end
®
metering pumps with parts which
2
ProMinent ®