Preparing The Camera - Canon MV300 Instruction Manual

Preparing the Camera

Adjust the viewfinder
• Turn the POWER on and set the camera
to record pause mode. Extend the
viewfinder straight out, then adjust the
viewfinder focusing lever to suit your
eyesight.
• Rotate the viewfinder to an angle that
allows you to view comfortably. Store
the camera with the viewfinder flush
with the body of the camera.
• To view with the viewfinder, make sure
the LCD panel is either turned so that the
subject can monitor viewing, or totally
closed with the screen facing inwards.
Prepare the lens cap
• Attach the cord to the lens cap, and
pass the grip belt through the loop on
the cord.
• Hook the lens cap on to the grip belt
while you are recording, and place it
over the lens when you have finished.
Fasten the grip belt
• Release the Velcro fastening and hold
the camera with your right hand while
you adjust the belt with your left.
Your index finger should reach the
zoom control and photo button, and
your thumb should reach the start/stop
button comfortably.
E
85