Canon MV300 Instruction Manual page 78

Preparations
E
The tape in the MV300i:
When using the MV300i's A/V insert function, only record to tapes recorded in
SP mode with continuously recorded time codes.
If there are non-recorded portions or portions recorded in LP mode on the tape,
recording will stop.
The playback tape:
Use only tapes without non-recorded portions.
If there are non-recorded portions or changes in the recording mode, you may not
be able to insert A/V correctly.
You cannot insert A/V when the playback tape has been poorly recorded.
Example recording from another camcorder
1. Connect the MV300i to the other camcorder.
2. Prepare the other camcorder.
• Turn on and load a recorded cassette.
• See its instruction manuals for details.
3. Turn the MV300i's POWER switch to VCR and load a recorded
cassette.
• Make sure the REC/SAVE tab on the cassette has been slid to REC (closed
position).
Editing
Use the wireless controller to operate A/V insert.
1. On the other camcorder, locate a point three seconds before the
scene to be inserted. Set the other camcorder to playback pause
mode.
2. On the MV300i, press PLAY and locate the recording start point.
Set the camera to playback pause mode.
• You can use the playback buttons on the body of the camera or the special
playback functions on the wireless controller in the same way as in playback
mode.
3. Press the A/V INSERT button.
• A/V INSERT and 2a appear in the display.
78