Using The Lcd Screen - Canon MV300 Instruction Manual

Using the LCD Screen

Open the LCD screen
E
Push the LCD panel OPEN button and
open the panel by pulling it away from
the camera. This automatically
switches the LCD screen on and the
viewfinder off. When you close the
LCD panel, the LCD screen
automatically switches off and the
viewfinder switches back on.
Changing the angle of the LCD screen
You can choose the angle of the screen
that suits you best by opening and
rotating the screen, also you can rotate
the LCD screen so that faces in the
direction of the lens (
You can also push the panel flat
against the camera until it is flush with
the side, with the screen facing
outwards.
• Avoid touching the LCD screen when moving the LCD panel.
• Do not hold the camera by the LCD panel or the viewfinder.
• Make sure you open the LCD panel at 90°, before attempting to rotate it.
• Always rotate the LCD panel vertically into place, before closing it or pushing
it flat against the side of the camera.
• Always fully close the LCD panel until it clicks securely.
22
24).