Canon MV300 Instruction Manual page 39

Setting the remote sensor mode
To prevent interference from other
Canon wireless controllers being used
nearby, there are two remote sensor
modes and an off setting. The wireless
controller and the camera have to be set
to the same mode in order to be
compatible.
The wireless controller and the camera have been preset to mode 1. If you change
the mode on the camera, be sure to change the mode on the wireless controller to
the same mode.
( 35, 36)
To turn the remote sensor off:
1. Open either the camera or the PLAY (MV300i: VCR) menu and select
WL. REMOTE.
2. Choose OFFB and close the menu.
• B appears in the display.
To change the mode...
...on the camera:
1. Open either the camera or the PLAY (MV300i: VCR) menu and select
WL. REMOTE.
2. Choose A
1
• The selected mode will appear on the display for four seconds.
...on the wireless controller:
Press and hold the REMOTE SET button on the wireless controller.
Simultaneously press the ZOOM W button for mode 1 or the
ZOOM T button for mode 2. Continue to press simultaneously for
over two seconds.
• Be sure to set the wireless controller to the same mode as the camera.
WL.REMOTE••• 1
or A
and close the menu.
2
REMOTE SET
A 1
: Mode 1
A 2
: Mode 2
OFFB : Sensor off
E
ZOOM
W T
39