Canon MV300 Instruction Manual page 84

Selecting audio output channels
E
When you play back a tape whose audio has been recorded on multiple channels,
you can change the output channels of that sound.
( 36)
1. Turn the POWER switch to PLAY (MV300i: VCR), load a tape
recorded with multiple-channel audio.
2. Open the PLAY (MV300i: VCR) menu and select OUTPUT CH.
3. Select the output channel.
• Refer to the following list.
OUTPUT CH setting
L/R
L/L
R/R
84
OUTPUT CH•••L/R
Tape recorded with
stereo sound
L+R channels
L channel only
R channel only
Played back sound
Tape recorded on
multiple channels
main + sub
main only
sub only