Canon MV300 Instruction Manual page 75

MV300i
The MV300i is equipped with the DV Recording function. The MV300i is
only available in certain areas.
Digital video equipment fitted with the DV terminal lets you edit, copy and
transfer data digitally, with virtually no generation loss in image and sound
quality. The DV terminal is for both line-in and line-out, since a single DV
cable can handle data in both directions.
• If a digital VCR is connected and an anomalous signal is sent from the
VCR, the images recorded on the tape may also be anomalous (although it
may not appear so on the TV image), or not recorded at all.
• You are unable to dub tapes recorded with the copyright protective signal.
REC SEARCH REC SEARCH
REC SEARCH REC SEARCH FOCUS FOCUS
Side with arrow
Preparations
1. Connect the camera and the other digital device.
• Connect the Canon CV-150F DV cable (optional) with the sides of the
plugs marked with the arrows facing as shown above.
2. Prepare the other device.
• Turn on the power and load a recorded cassette.
3. Turn the camera's POWER switch to VCR and load a blank
cassette.
• DV IN appears in the display.
EXP EXP
REC PAUSE
(LINE-IN)
Side with arrow
: Signal flow
REC
SEARCH
PAUSE
SELECT
ZERO SET
REW FF
PLAY
MEMORY
AUDIO
– /
STOP + /
DUB.
A/V
× 2
PAUSE SLOW
INSERT
E
75