Canon MV300 Instruction Manual page 56

Digital effects can be set with the controls on the body of the camera or the
E
wireless controller. Pressing the
correspond to turning the selector dial up and down, and pressing the SET button
corresponds to pressing the selector dial in.
P
Operating faders
Sound and image fade together.
When operating faders while recording, make sure the program selector is set to
Q.
Set fader
1. Press the DIGITAL EFFECTS button to open the digital effects
menu.
2. Move the arrow up and down with the selector dial.
• Point the arrow at FADER.
3. Press the selector dial in.
• FADE-T, WIPE
4. Turn the selector dial.
• Point the arrow at your selected setting.
5. Press the DIGITAL EFFECTS button.
• The menu disappears and the name of your selected setting flashes in the
display.
Fader on/off
6. Press the ON/OFF button.
• The name of your selection stops flashing.
• Each time you press the ON/OFF button, the chosen fader is activated
(display lights continuously) or deactivated (display flashes).
7. If you're in camera mode:
If you're in PLAY
(MV300i:VCR) mode:
56
/ buttons on the wireless controller
ON/OFF
, WIPE , M.FADE settings appear.
Fade in- Press the start/stop button.
Fade out- Press the start/stop button.
Fade in- Press the
Fade out- Press the
DIGITAL DIGITAL
EFFECTS EFFECTS
MENU
D.EFFECTS
e
(play) button.
a
(pause) button.
SET
ON/OFF