Digisol DG-BG4300NU User Manual page 65

Parameter
IPSec Connection Name
IP version
Tunnel Mode
Local Gateway Interface
Remote IPSec Gateway
Address
Tunnel Access from local
IP address
IP address for VPN
Mask or prefix length
Tunnel access form
remote IP address
Key exchange method
Authentication Method
Pre-Shared key
Perfect forward secrecy
Advanced IKE settings
Click on "Show Advanced Settings". The screen shown below will appear.
Enter a name for IPSec Tunnel.
Select the IP Version.
Select the IPSec Tunnel mode.
Select the local gateway interface.
Enter the remote IPSec Gateway IP Address.
Select Subnet or Single IP Address.
Enter the IP Address.
Enter the Subnet Mask.
Select Subnet or Single IP Address for the remote network.
Select the key exchange mode.
Select the authentication mode.
Enter a new VPN Key for the IPSec tunnel.
Select Enable or Disable.
Click to show advanced setting.
65
DG-BG4300NU User Manual
Description