Digisol DG-BG4300NU User Manual page 52

Click on "Add" button to add a rule. The below given screen will appear. By entering the settings in this
page, you can create traffic class rule to classify the ingress traffic into the priority queue and optionally
mark the DSCP or Ethernet priority of the packet. Click "Apply/Save" button to save and activate the
rule.
Parameter
Traffic Class Name
Rule Order
Rule Status
Class Interface
Ether Type
Source MAC Address
Destination MAC address Enter the Destination MAC address.
Destination MAC Mask
Specify Class Queue
Mark DSCP
Mark 802.1p priority
Set Rate Limit
Name of the Traffic Class.
Select the Rule Order.
Enable or Disable the Rule Status.
Select the Traffic Class Interface on which rule is to be applied.
Select the Ether Type as required.
Enter the Source MAC Address.
Enter the Destination MAC Mask.
Enter the Class Queue.
Select the DSCP from the List.
Select the Priority from 0-7.
Set the Rate limit here.
52
DG-BG4300NU User Manual
Description