You can select LLC or VC-Mux as the encapsulation mode according to the uplink equipment or use the
default setting.
1483 Bridged: If you select 1483 Bridged as the WAN protocol, you must use the third party
Dial-up software or Windows New Connection Wizard to configure the Internet dial-up access.
1483 MER: If you select 1483 MER as the WAN protocol, the router obtains an IP address
automatically.
PPPoE /PPPoA: If you select PPPoE or PPPoA as the WAN protocol, click Next, and the
following page appears.
1483 Routed: If you select 1483 Routed as the WAN protocol, you cannot use the DHCP
service. You need to enter the IP address, subnet mask, default gateway and DNS that is provided
by your ISP.
Select the Country: India and then select the service provider from the drop-down list. You can
change the VPI/VCI values as instructed by your ISP.
24
DG-BG4300NU User Manual