Digisol DG-BG4300NU User Manual page 47

Parameter
Username
Password
APN Code
Pin Code
Dialup Number
Baud Rate
MTU
MRU
LCP Echo Interval
LCP Echo failure
Network Preference
Click on "driver add". Below given screen will appear to add a new 3G dongle drive.
Parameter
Driver List
Device Name
Default Vendor
Default Product
Target Vendor
Target Product
Message Endpoint
Dev Name
Huawei Mode
Message Content0
Message Content1
Type Username, provided by 3G ISP.
Type Password, provided by 3G ISP.
Type APN code, provided by 3G ISP.
Pin code is provided by ISP.
Type Dialup number provided by ISP (e.g.: *99# or #777 etc.)
Baud rate do not change.
Maximum Transfer unit – Set by ISP.
MRU. Do not change the default.
LCP Interval – Do not change the default.
LCP Failure – Do not change the default.
Can Set 3G / 2G / Automatic mode.
Lists the Driver added manually by user.
Enter the name of Driver to be added.
Here type the Vendor ID of the USB Dongle for Mass Storage.
Here type the Product ID of the USB Dongle for Mass Storage.
Here type the Vendor ID of the USB Dongle for USB Modem.
Here type the Product ID of the USB Dongle for USB Modem.
Endpoint of Mass Storage device.
Type the Device name (E.g./dev/ttyUSB2), use USB sniffer tool.
Select only if card is Huawei make.
Type 62bit Hexadecimal No. (Use Bushound tool)
Type 62bit Hexadecimal No. (Use Bushound tool)
47
DG-BG4300NU User Manual
Description
Description