Connecting To A Switchboard; Inserting A Pause; Recall - BT Synergy 4500 User Manual

Connecting to a switchboard

This product is intended for use within the UK for
connection to the public telephone network and
compatible switchboards, which support tone and
pulse dialling and timed break recall. If in doubt
please consult your service provider.

Inserting a pause

With some switchboards, after dialling the access
code you may have to wait for a moment while
the switchboard picks up an outside line so you
will need to enter a pause in the dialling
sequence.
LNR
Press to insert a pause (P) before entering
the telephone number.
You may also need to enter a pause when storing
international numbers or charge card numbers.

Recall

You may need to use the recall function if you are
connected to a switchboard/PBX (Private Branch
Exchange), contact your PBX supplier for further
information. The recall function is set to timed
break recall and is also used for BT Calling
Feature.
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
Synergy 4500 – Edition 2 – 18.03.06 – 7367 Synergy 4500 – Edition 2 – 18.04.06 – 7367
General information 97