Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for BT 4010 Classic
Summary of Contents for BT 4010 Classic
- Page 1 Diverse 4010 Classic...
- Page 2 Diverse 4010 Classic ~ Issue 2 ~ 6th Edition ~ 1st March ’02 ~ 4413 Please open this page for an ‘At a glance’ guide to your Diverse 4010 Classic.
-
Page 3: At A Glance
Diverse 4010 Classic ~ Issue 2 ~ 6th Edition ~ 1st March ’02 ~ 4413 At a glance In use light Lights up to indicate an incoming call, an alarm call or when the handset is in use. Right hand side Takes you into the calls list. - Page 4 When in mode Press the left side of the button for and right side of the button for when going through the menu options. buttons allow you to select options within each menu that are shown on the display. Press the right side of the button to confirm (OK) menu selection.
-
Page 5: Table Of Contents
Introduction Safety information Setting up Using the telephone If you experience any dif ficulties with your Diverse 4010 Classic, please call the BT Diverse Helpline Caller Display and other Select Services Handset settings Base station settings Using additional handsets... -
Page 6: Menu Structure
Menu Structure If your handset is registered to a Diverse 4016 answering machine base, you will have additional menu’s in No.6 Voice Mail. Please refer to your Diverse 4016 guide to see what further menus are now available. - Page 7 If you make a mistake, you can return to the previous menu by pressing the button. If you keep pressing the button you will return to the idle screen.
-
Page 8: Quick Guide
Quick guide Hold down Hold down Hold down Select one of last 5 numbers Enter number Enter name Call all or Handset no. (e.g. 2) Enter the date Enter time Enter the alarm time To select AM/PM... -
Page 9: Quick Guide To Handset
Quick guide to handset display icons If you experience any dif ficulties with your Diverse 4010 Classic, please call the BT Diverse Helpline on... -
Page 10: Introduction
Enter your base station PIN code here: For more information on your base PIN codes see page 34. If you experience any dif ficulties with your Diverse 4010 Classic, please call the BT Diverse Helpline... -
Page 11: Safety Information
Safety information Only use the power supply included with the product. Using an unauthorised power supply will invalidate your guarantee and may damage the telephone. Power supply number is M-GA35-095130F. For the handset use only approved nickel-cadmium (NiCad) rechargeable batteries. Never use other batteries or conventional alkaline batteries. -
Page 12: Setting Up
Setting up Please note that your handset is NOT registered to the base station. The Diverse 4010 handset will be easily registered once you complete the steps 1 to 3 below. Situate your product close enough to the telephone and mains power sockets so that the cables will reach. - Page 13 All additional handsets you purchase will need to be individually registered with the base station before they will work with the Diverse 4010 Classic. Leave the handset for approx. 16 hours in the base station to charge the batteries, as they are not charged in the factory.
- Page 14 Eventually they will need to be replaced. New batteries can be obtained from any BT shop or from the Diverse Helpline 08457 908070. If you replace the handset batteries with ones that have been fully...
- Page 15 Ensure that each end of the line cord is fitted into the correct socket. Fit the belt clip onto the back of the handset. Your Diverse 4010 Classic is now ready for use. However, If you experience any difficulties please call the BT Diverse Helpline on 08457 908 070.
- Page 16 If you subscribe to a Caller Display Service the time and date will be set with the first incoming call. However, the year setting will have to be changed manually, see page 13. The handset’s default setting is 12-hour clock. To change the clock to the 24-hour setting: Press the button.
-
Page 17: Using The Telephone
Using the telephone Your Diverse 4010 Classic has a menu driven display. The below the display allow you to select options within each menu and make adjustments to their settings. When the phone is in idle mode, press the button to enter the main menu. During... - Page 18 Your handset automatically times the duration of all external calls, showing it on the display during your call and for a few seconds after it is finished. When the phone rings, the In use light on top of the handset will flash.
-
Page 19: If You Experience Any Dif Ficulties
Press the button to dial the number. button button. If you experience any dif ficulties button. with your Diverse 4010 Classic, please call the BT Diverse Helpline button to Press the button. Use the keypad to enter the first letter of the name you wish to edit. - Page 20 Press the Use the keypad to enter the first letter of the name. Use the the entry you want. Press the Press the display Press the The number is deleted. Press the until you reach the idle screen. To cancel any procedure, press the button until the display returns to the idle screen.
- Page 21 Your handset automatically saves the last five telephone numbers dialled into a redial list. Press the button. The last number dialled will be displayed. Press the scroll through the redial list. Press the button to dial the number. Press the button.
- Page 22 You can now speak to your caller again. If you experience any dif ficulties with your Diverse 4010 Classic, please call the BT Diverse Helpline You can alert handset users that they are wanted, or locate a missing handset.
- Page 23 You can transfer an external call to another handset registered to the base. Press the options button. Enter the number of the handset to which you wish to transfer the call. When the other handset answers you can tell them you are transferring the call and press the button.
- Page 24 You can talk to one external caller and another internal caller at the same time on your Diverse 4010 Classic handset. While another handset user is talking to an external caller the display shows Press the button to join the conversation.
- Page 25 When the alarm goes off it sounds like an incoming call and lasts for about 30 seconds. Press any button to switch the alarm off. If you experience any dif ficulties with your Diverse 4010 Classic, please call the BT Diverse Helpline button...
-
Page 26: Caller Display And Other Select Services
Waiting you must first subscribe to the Services from your Network Provider. For more information on BT’s Select Services call BT free If you subscribe to a Caller Display Service you can see who is calling you on your handset display, as well as the date and time of their call (unless the number has been withheld). - Page 27 Press the options button. A flashing envelope indicates new calls. New calls are displayed immediately. If there are no new entries, continue to open the Calls list. Press the button to highlight The display will show the type of calls you have received in your Calls list, e.g.
- Page 28 Store a number from the Calls list into the directory: When the number you want to store is displayed: Press the button. Press the highlight Press the number is displayed. Press the Enter a name if you wish, see page 16 for instructions. Press the The display shows can either copy another entry...
- Page 29 Internet via your PC and do not want Call Waiting to interrupt you. options button to If you experience any dif ficulties with your Diverse 4010 Classic, please call the BT Diverse Helpline Press the options button, is displayed. Press the options button.
- Page 30 You can divert all incoming calls to another number where you can be reached. Call Divert requires subscription from your Network provider. You may be charged a subscription fee. Press the button, highlighted. Press the Use the options button until is highlighted.
- Page 31 Mail on your telephone line you can set the 1 button to access your messages directly via one button. options If you experience any dif ficulties with your Diverse 4010 Classic, please call the BT Diverse Helpline button Press the options button.
- Page 32 Follow the steps on the previous page, but when you come to enter the telephone number of your messaging service, you will need to follow the example below: Enter the access number for your messaging service. Press and hold the button to enter a pause in the dialling sequence.
-
Page 33: Handset Settings
Handset settings You can choose from 5 levels ( – ), a ‘crescendo’ ring ( ) that increases in volume, or you can switch the ringer off altogether ( ). Press the Use the button to highlight Press the button. Press the highlight Press the... - Page 34 There are 3 volume levels to choose from and you can even adjust the volume during a call. Press the Press the highlight Press to confirm. The display show Press to confirm. You hear the current volume and the level is displayed. Select the required level.
- Page 35 Press the options button. Press the button. WXYZ Press the button. The display shows Press to confirm. This will reset: Earpiece volume Ringer volume Ringer melody Autotalk Battery low beep Redial list This will not delete the directory or Calls list. This will not reset: Handset PIN Registration to the base station.
-
Page 36: Base Station Settings
Base station settings Your base station PIN has a default setting of but you may want to change this to prevent unauthorised use of your handset(s). If you change your PIN keep a record of the new number by writing it in the space provided on page 8. - Page 37 Press the button to confirm. is displayed. Press the until you reach the idle screen. If you experience any dif ficulties with your Diverse 4010 Classic, please call the BT Diverse Helpline Press the Press the highlight Press the Press the...
-
Page 38: Using Additional Handsets And Bases
WXYZ PQRS WXYZ PQRS WXYZ If you purchase new handsets to use with your current Diverse 4010 Classic, they will not be pre-registered to a base station. You will need to do this before you can use them. PQRS WXYZ... - Page 39 If you want to register your handset to another base station you will need to manually register it. Diverse 2000 and 3000 handsets and other makes of handset must be registered manually. Handsets must be GAP compatible. On the handset to be registered: Press the options button.
- Page 40 Press the Press the to select the handset to be de-registered ( Press the Press the the display shows Press the will show Enter your 4-digit PIN (original setting Press the shows Press the is displayed. Press the until you reach the idle screen. You can personalise the name of a handset.
-
Page 41: Help
Help If you experience any dif ficulties with your Diverse 4010 Classic, please call the BT Diverse Helpline on... - Page 42 *With the Diverse 3016, although you will hear the beeps when a call is waiting, the number or name of the waiting caller will not be shown on the handset display. The list below details the approved rechargeable batteries that can be used in your Diverse 4010 Classic handset. Only use the approved batteries.
-
Page 43: General Information
Subject to the terms listed below the guarantee will provide for the repair of, or at BT’s or its agent’s discretion the option to replace the Diverse 4010 Classic, or any component thereof, (other than batteries), which is... - Page 44 The Diverse 4010 Classic has a REN of 1. Any other instrument provided by BT may be assumed to have a REN of 1 unless stated otherwise. A total REN of 4 is allowed.
- Page 45 You need only adjust this setting if your switchboard requires a different recall time to the pre-set recall time of 100 MS. Press the Press the the display shows Press the button. Press the display shows Press the button. Press the display shows Press the button.
- Page 46 If you want to insert a pause into a telephone number you are storing in your directory, start storing the number (see page 16) and where a pause is needed, press and hold the A ‘ ’ will appear in the number. You can insert a pause to allow your switchboard time to get a line before your Diverse 4010 dials the number.
-
Page 47: Index
Index dditional handset and bases Alarm Autotalk on/off ase station reset Base station PIN Base station options ringer melody ringer volume Batteries charging installing performance replacing warning beeps Belt clip all divert Call timer Call Waiting Caller Display Calls list delete dialling a number display status of call... - Page 48 display on/off naming reset ringer melody ringer volume Handset quick guide Help Holding calls nternal calls eyguard aking calls Melody base handset Menu structure n/off alarm auto talk handset power keyguard secrecy age a handset Pause Phone socket Power connection Preparatory dialling Pulse dialling uick guide...
- Page 49 Nothing in this publication forms any part of any contract. © British Telecommunications plc 2002. Registered Office: 81 Newgate Street, London EC1A 7AJ. Registered in England No. 1800000. Diverse 4010 Classic Issue 2 (02/02) 6 Designed by The Art & Design Partnership Limited. Siemens number: A31008-G4010-P101-5-7619...
Need help?
Do you have a question about the 4010 Classic and is the answer not in the manual?
Questions and answers