Entering Text - BT Synergy 4500 User Manual

Received messages are stored in the Inbox
Your BT Synergy 4500 can store up to 50* messages.

Entering text

A single text can be up to 160 characters. The number of
characters still available to use is shown in the top left
corner of the display as you enter each character.
For sentence case, select
For upper case, select
For lower case, select
To enter numbers, press and hold the relevant number
button until the number appears or press the button
until the number appears, e.g. to enter 3, press
four times.
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
Synergy 4500 – Edition 3 – 18.04.06 – 7367
Abc
ABC
abc
If there is a problem sending a
message the display shows
Message Sending Failed
handset returns to standby. If you
open the Outbox the message is
marked as it is not sent. Your BT
!
Synergy 4500 will have 2 further
attempts at sending your message
at 10 minute intervals. If the
message fails to be sent on the
third attempt the message
will be displayed alongside
Error
the message in the Outbox
(replacing the time and date).
If another handset is on the line
when you try to send a text
message, you will see
and the message will be stored in
the Outbox with the message
Sent. When the line becomes
available your BT Synergy 4500
will attempt to send the message
again.
3
When writing a message, if no
keypad button is pressed for 30
seconds the display will return to
idle and the message will not
be sent.
* Maximum number of messages
across Inbox and Outbox is 50.
Text messaging
and the
Sending
Line in Use
Not
65