255 Name And Number Phonebook; Store A Name And Number - BT Synergy 4500 User Manual

22 Using the phone
Paging calls cannot be answered
by a handset.
The paging ring will stop
automatically after 30 seconds
if no button is pressed and your
handset will return to standby.
Entering names
There is a character map on page
14 to help you when entering
names.
Use the keypad letters to enter
names, e.g. to store TOM:
8
Press once to enter T.
6
Press three times to enter O.
6
Press once to enter M.
Writing tips
Press to delete the last
character or digit.
Select A-a option to switch
between upper and lower case.
1
Press to insert a space.
0
1
Use , ,
other punctuation characters, see
page 14 for full character map.
You MUST enter a name and a
number, otherwise the display will
show Error.
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
Synergy 4500 – Edition 3 – 18.04.06 – 7367
1. Press
2. Press
Or
Press any button on the handset.

255 Name and number phonebook

You can store up to 255 names and numbers in the
phonebook. Names can be up to 13 characters long and
numbers up to 24 digits. You can also select different
ring tones for phonebook entries.

Store a name and number

1. Select the
2. When storing the first entry:
press
When storing further entries: press
Entry
3.
Enter Name
and for
keypad.
4. Select
5. Enter the telephone number using the keypad.
on the base. The paged handset(s) rings
to stop the paging ring
option.
OK
to select.
, then press OK to select.
is displayed. Enter the name using the
OK option to confirm.
Add Entry is highlighted,
Opt to display
Enter Number is displayed.
Add