Call Waiting - BT Synergy 4500 User Manual

Call Waiting

With Call Waiting, during a call, if another caller is trying
to reach you, you will hear a soft beep every 5 seconds.
If you have also subscribed to a Caller Display Service,
the caller's number (or name if stored in the Directory)
will be shown on the display for 20 seconds, after this
time the display will return to your first caller's details.
Instead of the engaged tone, the second caller will hear
an announcement to hold as you are aware that they are
waiting.
To use Call Waiting
To answer the second call, without disconnecting from
your first caller:
R
1. Press . The first caller will be put on hold.
Int
R
2. Press again to return to the first caller, and then
Int
press it each time you want to switch between the two
callers.
To disconnect the first call and take the waiting call:
1. Press to end the call with the first caller. The handset
will then ring.
2. Press and continue your conversation with the
second caller.
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
Synergy 4500 – Edition 3 – 18.04.06 – 7367
BT Calling Features
IMPORTANT
To use Call Waiting you must first
subscribe to the service from your
network provider. A quarterly fee is
payable.
For more information on BT Calling
Features call BT free on 0800 800
150.
The Call Waiting beep is not
audible to the person you are
speaking to.
59