Base Loudspeaker Volume; To Change The Answer Delay Setting Via The Base - BT Synergy 4500 User Manual

42 Answering machine
If you adjust the volume when the
answering machine is not being
used, a beep sounds at each press.
When the volume reaches its
highest or lowest levels two beeps
will sound.
For more information on Time
Saver setting, see page 54.
Time Saver is displayed on the
base unit as and on the handset
t
as
Time Saver.
Synergy 4500 – Edition 3 – 18.04.06 – 7367
1. Press
1. Press and hold
2. Press and release
If you experience any problems, please call the Helpline on 0870 605 8047

Base loudspeaker volume

You can adjust the base loudspeaker volume from 0
(volume off) to 9, plus H (maximum volume). The default
level is 5.
to increase the volume or
the volume.
Answer delay
Answer delay sets the number of times your BT Synergy
4500 will ring before the answer machine picks up your
call and starts playing the outgoing message.
You can change this setting to between 2-9 rings or time
saver (t). The default setting is 6 rings.

To change the answer delay setting via the base

until the current setting is
announced, then release.
settings, until you reach the setting you want. With each
press the option will be announced and shown on the
base display.
When you hear the setting you want, do not press the
button again. After a short delay your chosen
to decrease
repeatedly to scroll through the