Answering Machine; Base Display - BT Synergy 4500 User Manual

Answering machine

40 40
Symbol Definition
(Blank) Power off.
C-0 (flashing) Day/Time needs to
be set.
Answer-on mode,
0-9
0-9 messages.
(flashing) 10-59 messages.
9
Indicates when
more than 9
messages are
stored.
alternating Power on, but set
–
with 0-9 to answer off mode.
The display flashes
between a dash and
the number of
messages saved in
the memory.
A (flashing) Handset menu or
Remote access in
use.
(flashing) Error.
E
(flashing) Memory full.
F
(flashing) Message paused.
P
When selecting
P-1:
Alternating or playing Answer
between & Record outgoing
P & 1 message.
P-2: When selecting
Alternating or playing Answer
between Only outgoing
P & 2 message.
If you experience any problems, please call the Helpline on 0870 605 8047
Synergy 4500 – Edition 3 – 18.04.06 – 7367
Your BT Synergy 4500 can digitally record up to 11
minutes of messages, with each message lasting a
maximum of 3 minutes. As well as recording incoming
messages, you can record memos for other users.
You can operate your answering machine from:
• the base.
• the handset.
• remotely, from any other Touchtone
see page 53.
Your BT Synergy 4500 comes with two pre-recorded
outgoing messages, Answer and Record or Answer Only,
but if you wish you can record your own.
You will need to set the day and time (if you have not
already done so) so that you will know when each
message was received, see page 9-10.

Base display

The base display shows symbols relative to your
answering machine and the table opposite provides
an explanation of what these symbols mean.
40
TM telephone,