Management - Draytek Vigor 3100 Series User Manual

3 . 8 . 6 M a n a g e
3 . 8 . 6 M a n a g e
The port number used to send/receive SIP message for building a session. The default value is
5060 and this must match with the peer Registrar when making VoIP calls.
Enable remote firmware upgrade
Allow management from the Internet
Disable PING from the Internet
Access List
Default Ports
User Defined Ports
Enable SNMP Agent Check it to enable this function.
Get Community
Set Community
82
m e n t
m e n t
You could specify that the system administrator can only login from a
specific host or network defined in the list. A maximum of three
IPs/subnet masks is allowed.
List IP - Indicate an IP address allowed to login to the router.
Subnet Mask - Represent a subnet mask allowed to login to the router.
Check to use standard port numbers for the Telnet and HTTP servers.
Check to specify user-defined port numbers for the Telnet and HTTP
servers.
Set the name for getting community by typing a proper character. The
default setting is public.
Set community by typing a proper name. The default setting is
private.
Chick the checkbox to allow remote firmware upgrade
through FTP (File Transfer Protocol).
Enable the checkbox to allow system administrators to
login from the Internet. By default, it is not allowed.
Check the checkbox to reject all PING packets from the
Internet. For security issue, this function is enabled by
default.
Vigor3100 Series User's Guide