Replacing The Air Cowl And Closing The Server - Fujitsu PRIMERGY RX300 S5 Operating Manual

CSS components Non-hot-plug components
8.2.1.4

Replacing the air cowl and closing the server

Ê Insert the air cowl in the server.
If an SAS/SATA RAID controller is installed and you disconnected the BBU
cable when you removed the air cowl:
Ê Connect the BBU cable that you disconnected previously.
Ê Return the housing cover to its position (see section "Opening/closing the
housing" on page 106).
Operating manual 103
RX300 S5