Removing A Defective Memory Module; Installing A New Memory Module - Fujitsu PRIMERGY RX300 S5 Operating Manual

Non-hot-plug components
8.2.1.2

Removing a defective memory module

Figure 32: Removing a memory module
Ê Press the holders on either side of the mounting location concerned
outward (1).
Ê Pull the memory module out of the slot (2).
8.2.1.3

Installing a new memory module

V
CAUTION!
Please note the equipping rules in the technical manual for the system
board D2619.
Figure 33: Inserting a memory module
Ê Carefully press the memory module into the slot (1) until the fastening tabs
on both sides of it engage (2).
Pay attention to the plug coding.
102 Operating manual
CSS components
RX300 S5