Fujitsu PRIMERGY RX300 S5 Operating Manual page 44

Installing/removing the server in/from the rack
Installation of the cable management is described in detail in the Technical
Manual for the respective rack.
3rd party racks
Certain general conditions must be met:
– Installation dimensions (see the dimensions shown in
1 Front of rack
2 Rear of rack
A Rack depth (comparison PRIMECENTER Rack 940/1000/1100 mm)
B Rack width (comparison PRIMECENTER rack 700 mm)
C Clearance for 19" installation level
C1 Front 19" installation level
C2 Rear 19" installation level
D Cable routing area (cable area depth) and ventilation
E Space for front panel and ventilation
F Space for right and left support systems
P PRIMERGY server installation depth
a1 Front left support upright
a2 Front right support upright
b1 Rear left support upright
b2 Rear right support upright
44 Operating manual
Hardware installation
figure 6 on page 45):
RX300 S5