Introduction; Intended Use; Technical Specification - Shoprider Paris GK9 User Manual

Introduction

Congratulations on your purchase of the Shoprider
scooter incorporates the latest innovative designs. The Paris can be used in
confined spaces both indoors and out. Direct drive rear transaxles and
electromagnetic brakes give a safe and efficient ride. The scooter can be
easily disassembled without tools and will fit into the boot of most vehicles for
easy transport. The detachable battery pack allows convenient charging
wherever necessary.

Intended Use

The Paris was carefully designed for indoor or outdoor use in pedestrian
areas by a single individual with limited mobility up to a maximum weight of
136kg (21st). The acute manoeuvrability prohibits the use by persons who are
severely physically impaired or those who have balance difficulties. Your
assessor/healthcare professional will determine the suitability of the scooter
for each individuals intended use.
Note: Persons with lower body amputations should not use this device
unless evaluated with artificial limbs fitted, as stability may be
compromised due to an irregular centre of gravity.

Technical Specification

Class 1 Medical Device
Class 2 Indoor/Outdoor Vehicle
Overall Size
Length
Width
Height
Battery
Height (Folded)
Maximum user weight
Safe working slope
Weight with batteries
Max. Speed
*
Passenger weight, rough ground conditions, low temperatures and battery
condition can affect maximum range.
Seat Dimensions
1050mm
560mm
880mm
2 x 21Ah
630mm
136kg / 21st
8º Battery charger (off board)
56kg
6km/h
(4mph)
3
®
Paris scooter. This
Width
Depth
Seat to floor pan
Backrest height
Range
Seat to floor
470-530mm
410mm
340-440mm
360mm
24km
(16m)*
460-560mm
3 amp