Shoprider Paris GK9 User Manual page 19

Continued.....
In the image opposite you
will see three white lines. To
ensure the battery pack is
properly assembled, the
surfaces must be level at
these points. Failure to do
do so may result in no power
to the scooter or a break in
the charge circuit which
would not allow the pack to
charge.
Note: If charging 'off board' – the packs must be correctly connected as
described above.
As indicated in the image, the
circuit breaker is located on
the top of the right hand pack.
Should the scooter fail to
operate and show no power,
check to see if the circuit
breaker button has not
'popped' up. To reset the
circuit breaker simply press
the button.
The charge socket is located
at the front of the right hand
pack. The scooter maybe
charged with the packs connected to the scooter or off board. Please make
note of the comment above regarding the re-assembly of the pack if charging
off board.
19