Initial Preparations; Charging The Battery Pack; Attaching The Strap; Holding The Camera - Canon PowerShot SX700 HS User Manual

Initial Preparations

Prepare for shooting as follows.

Attaching the Strap

z z
Thread the end of the strap through the
strap hole ( ), and then pull the other
end of the strap through the loop on the
threaded end ( ).

Holding the Camera

z z
Place the strap around your wrist.
z z
When shooting, keep your arms close to
your body and hold the camera securely
to prevent it from moving. If you have
raised the flash, do not rest your fingers
on it.

Charging the Battery Pack

Before use, charge the battery pack with the included charger. Be sure to
charge the battery pack initially, because the camera is not sold with the
battery pack charged.
1
Insert the battery pack.
z z
After aligning the  marks on the battery
pack and charger, insert the battery pack
by pushing it in ( ) and down ( ).
2
Charge the battery pack.
z z
CB-2LY: Flip out the plug ( ) and plug
the charger into a power outlet ( ).
z z
CB-2LYE: Plug the power cord into the
CB-2LY
charger, then plug the other end into a
power outlet.
z z
The charging lamp turns orange, and
charging begins.
z z When charging is finished, the lamp turns
green.
CB-2LYE
Before Use Before Use
Basic Guide Basic Guide
Advanced Guide Advanced Guide
Camera Basics Camera Basics
Auto Mode / Hybrid Auto Mode / Hybrid
Auto Mode Auto Mode
Other Shooting Other Shooting
Modes Modes
P Mode P Mode
Tv, Av, and M Mode Tv, Av, and M Mode
Playback Mode Playback Mode
Wi-Fi Functions Wi-Fi Functions
Setting Menu Setting Menu
Accessories Accessories
Appendix Appendix
Index Index
12