Sync); Sending Images Automatically; Clearing Registered Destinations - Canon PowerShot SX700 HS User Manual

Clearing Registered Destinations

z z
Press the <n> button, and then
choose [Mobile Device Connect Button]
on the [3] tab
z z
Press the <q><r> buttons or turn the
<5> dial to choose [OK], and then press
the <m> button.
z z After a confirmation message is
displayed, press the <m> button.
•
Registered destinations are also cleared when you reset Wi-Fi settings
(= 144).
Images on the memory card that have not been transferred already can be
sent to a computer or Web services via CANON iMAGE GATEWAY.
(= 24).
Note that images cannot be sent only to Web services.
Install and configure the software on the destination computer.

Sending Images Automatically

(Image Sync)
Initial Preparations
1
Install the software.
z z
Install the software on a computer
connected to the Internet
2
Register the camera.
z z
Windows: In the taskbar, right-click [
and then click [Add new camera].
z z
Mac OS: In the menu bar, click [
then click [Add new camera].
z z
A list of cameras linked to CANON
iMAGE GATEWAY
Choose the camera from which images
are to be sent.
z z
Once the camera is registered and the
computer is ready to receive images, the
icon changes to [
Before Use Before Use
Basic Guide Basic Guide
Advanced Guide Advanced Guide
Camera Basics Camera Basics
Auto Mode / Hybrid Auto Mode / Hybrid
Auto Mode Auto Mode
Other Shooting Other Shooting
Modes Modes
P Mode P Mode
Tv, Av, and M Mode Tv, Av, and M Mode
Playback Mode Playback Mode
121).
(=
Wi-Fi Functions Wi-Fi Functions
],
Setting Menu Setting Menu
], and
Accessories Accessories
Appendix Appendix
(= 117) is displayed.
Index Index
].
139